Assembly Diagrams

ASSEMBLY INSTRUCTIONS

5.DISMANTLING YOUR CLAM

a.To take your Clam 6800 down, repeat steps 1–3 in reverse order. Lay all the poles on one side of the base. Fold the tent into the base, making sure you don’t fold or crease the windows as that could cause them to crack.

b.Close up the base and secure the rubber latches.

Note: Continuous pulling behind a four wheeler or snowmobile will result in premature wear of the base. We recommend a ski or slide system be mounted to the base of your Clam (i.e., nylon strapping or old downhill or cross country skis).

DIAGRAM A

Page 7