MODEL #: 08100
NAME: Birdnest Tote Bed
PARTS INCLUDED:
(A)1 - Tote Bed
(B)4 - Plastic Support Ribs
(C)1 - Hood
(D)1 - Fabric Sheet
(E)1 - Mattress
BEFORE YOU
BEGIN
ASSEMBLY:
Ensure that all the parts and hardware listed are included.
If anything is missing, please do not return the product to the store.
ASSEMBLY INSTRUCTIONS
Save these instructions for future use.
C
D, E
A
B
PICTURE 1
STEP 1: See PICTURE 1. Remove the SHEET and MATTRESS (D, E) from the TOTE BED (A). Remove
the inner fabric liner from inside the TOTE BED (A) by separating the hook and loop tape around the top, inner edge. Insert the FOUR RIB SUPPORTS
(B)into the vertical pockets on the inside of the TOTE BED (A). There is one at the head, one at the foot, and one on either side. Replace the fabric inner liner by refastening the hook and loop tape. Replace the sheet and mattress inside the bed.
STEP 2: See PICTURE 2. Join the zipper pull on the HOOD (C) to the zipper on the top edge TOTE BED and zip around the full edge of the hood/ bed. The hood can be removed and reattached at any time. The BIRDNEST TOTE BED is now assembled! Be sure to review the safety instructions on PAGE 2!
PICTURE 2
Visit us online at www.badgerbasket.com
Web: http://www.badgerbasket.com/parts •
Mail: PO Box 227, Edgar, WI
Page 1 of 2 | 1.1/0608 |