Operating Eggspert with the Adapter

Using the AC Adapter, EGGSPERT can run indefinitely without batteries. To use the unit with the adapter, follow these instructions:

1.Plug the end of the adapter cord into the AC adapter jack, located on the right side of EGGSPERT’s Control Center.

For AC

Adapter

•EGGSPERT must only be used with the included AC adapter.

•The AC adapter should be examined regularly for damage to the cord, plug, enclosure, and other parts. In the event of such damage, do not use this AC adapter until the damage has been repaired.

•The AC adapter is not a toy.

2.Carefully plug the adapter body into an electric outlet.

•EGGSPERT must not be connected to more than the recommended number of power supplies.

•Disconnect EGGSPERT from the AC adapter before cleaning.

CARING FOR EGGSPERT

•Clean EGGSPERT with a dry cloth. Do not immerse or spray any liquid or water on the unit.

•To clean CONTROL and ANSWER BUTTONS, remove cords from Control Center. Gently wipe BUTTONS with a damp cloth. Allow to dry before reinserting cords into Control Center.

•Carefully insert BUTTON plugs into EGGSPERT. Do NOT remove them by pulling on the cords.

•Do NOT immerse CONTROL and ANSWER BUTTONS in water or other liquids.