To the Playstore base as

1. Snap the 2 supports in place at bottom of Playstore base as shown.

2. Lay assembly flat down on a table top or floor as shown. Assemble the red plaque to base, fitting plaque into place, then securing with 4 screws (included) and a Phillips screwdriver (not included).

5.Insert 3 "AA" alkaline batteries (not included) into the battery compartment located in back of register. Follow direction indicators inside compartment. Use the screwdriver to attach the battery compartment door (packaged separately).

BATTERY COMPARTMENT

DOOR

SCREW

RED

PLAQUE

BASE

SUPPORTS

3. Attach and fasten the safe housing to the Playstore

4. Assemble the counter/register

assembly. Fit safe housing inside fittings in Playstore, angling in the right side first, then the left. Secure housing to Playstore with 3 screws and the screwdriver.

SAFE

HOUSING

SCREW

shown; fit the bottom of

counter into fittings on top of

base. Fasten the 5 fittings with

the screws included, and the

Phillips screwdriver.

COUNTER

SCREWBASE

CAUTION: TO AVOID BATTERY LEAKAGE

1.Be sure to insert the batteries correctly and always follow the toy and battery manufacturers' instructions;

2.Never mix old and new batteries or alkaline, standard (carbon-zinc) or rechargeable (nickel-cadmium) batteries;

3.Always remove weak or dead batteries from the product.

NOTICE: When the PLAYSKOOL Playstore is moved or knocked over, the batteries inside the base may become slightly dislodged, and the electronic features will not function properly. If this happens, simply open the battery compartment, remove and re- insert the batteries. If problems persist, the batteries may need to be replaced.

6.To assemble the safe door to safe compartment below register, press and snap door into hinges at an angle, as shown.

7.To make night deposits, drop the play money (bills and coins) into the chutes on the side of register, and it will drop down directly into the safe.

SAFE DOOR	HINGES	DEPOSIT

		CHUTES