RCA RTDVD1 Test Tone / Channel balance, Connecting for Power, Using Headphones, Factory Setting

Page 13

Getting Started

Test Tone / Channel balance

Channel balance

Your receiver is equipped with a test signal generator for balancing the channels. As the signal "travels" from chan- nel to channel, adjust the level controls until each channel plays at the same loudness level. (details see operation of test/setup)

Connecting for Power

Make sure you connect all your other

electronic components and theEN speakers before plugging your

receiver into the outlet. Plug the power cord in the wall outlet, matching the wide blade of the plug with the wide slot in the outlet. Be sure to insert the plug completely.

Courtesy Dolby Laboratories

Level adjustment & surround channel level expectation

Even though you adjust the surround channel to be as loud as the others on the test signal, you'll find that on actual program material the surround channel is usually much lower than the front. Don't be tempted to readjust the sur- round level; program producers use surround mostly for subtle atmosphereics and ambience, and only rarely for special effects. A good surround mix doesn't call attention to itself; if it did, it would soon become distracting.

NOTE

The system is equipped with Dolby Digital, and manufactured under License from Dolby Laboratories.

Dolby Digital Manufactured under license from Dolby Laboratories. “Dolby”, “Pro Logic”, “Pro Logic II”

and the double-D symbol are trademarks of Dolby Laboratories. Copyright 1992-1997 Dolby Laboratories, Inc. All Rights Reserved.

Using Headphones

To listen privately through your audio system, use the PHONES jack on the receiver. However, make sure you turn down the volume before you put on the headphones. Increase the volume to the desired level after headphones are in place.

Once headphones are connected, “HEADPHONE DOWNMIX 2 CHANNEL” will scroll on display. This feature automatical- ly converts multi-channel outputs to 2 channel stereo for your listening pleasure.

Hearing Comfort & Well-Being

•Do not play your headset at a high volume. Hearing experts advise against continuous extended play.

•If you experience a ringing in your ears, reduce volume or discontinue use.

Factory Setting

The RTDVD1 is preset to the following setting when you first turn on the power

Source = DVD/CD Volume setting = 45 dB

Bass & Treble = 0 dB

Restore to Factory Settings

You can always restore all settings back to its original state. When the receiver is in STANDBY mode, press accordingly on the main unit to restore all settings back to factory

default :

 

 

PRESET -

PRESET +

BASS/TREBLE

NOTE

All preset radio stations and surround sound set- ting will be lost after factory setting is restored.

9

Page 12 Page 14
Image 13
Page 12 Page 14
Contents RTDVD1 Importador MusicMatch Jukebox MusicMatchTM SoftwareService Information For Your SafetyFCC Information For Your RecordsTable of Content Unpacking the DVD Receiver Getting StartedUnpacking The Speakers Protect your Components from OverheatingEN Set up and Maintenance of the ReceiverAnalog Input Connecting to Audio-Visual ComponentsAM Loop Antenna and FM Indoor Antenna Digital ConnectionsSpeaker Polarity Connecting the SubwooferSpeakers Speaker cordsFront Speaker Placement Advanced SettingPositioning your speaker Location Preferred surround placement Advanced SettingRear wall No adjacent wallsUsing Headphones Connecting for PowerFactory Setting Test Tone / Channel balanceReceiver Controls Operating Your ReceiverOperating Your Receiver Your Remote ControlDisplay Auto programming in tuner mode is activatedSelection of Audio/Video source Switching on /offExample VCR Using the Remote to Control Additional ComponentsDolby Pro Logic II and Dolby 3 Stereo Sound Enhancement SystemsDolby Digital Advanced Sound Control Fine Setting of the ComponentsSpeaker Configurations Fine Setting of the SpeakersFactory Default Setting Test buttonSpeaker Icons Advance Sound ControlDisplaying Program Formats DVD Player Basic Playback FeaturesQuick search Freeze frame, frame advance and frame backwardOn-screen banner display Slow motion playbackGeneral use Selecting a chapter Selecting a titleSelecting subtitle language Selecting audio languageSelecting camera angle Using bookmarksAdding bookmarks Recalling bookmarksProgram playback Repeat During Playback OnlyEdit program Disc Repeat Title Repeat Chapter Repeat OffDelete program Cancel programInsert chapter Audio language Set up menuFor languages other than options available Menu language Subtitle languageFor languages other than options available Set password PasswordRating Parental control Clear password Change passwordTV aspect Loading and playing an audio CD CD / MP3 PlayerQuick scan RepeatRandom Selecting a track Time display mode Time indicatorIntroScan Only for audio CDs Track Intro Bookmarks Disc typeBookmarks Audio CDs Only Repeat and random featuresAdding Bookmarks Audio CDs Only Time display Audio CDs OnlyI T a L Insert trackFile mode Folder modeOn- screen display for MP3 playback Normal PlayDelete a specific File or Folder from Program List Program PlayDelete All Radio Manual tuningOperating the Radio Manual preset Automatic preset storingRetrieving preset stations Storing radio stationsRemote control PowerVideo and audio PlaybackEquipment Specifications RTDVD1 Troubleshooting TipsSubtitle, language, camera angle etc RadioCleaning discs CleaningImportant battery information Safety precautionsCable Codes Remote CodesRemote Codes Audio RCA/Dimensia only Satellite ReceiversLaser disc Players Language Codes For how long after your purchase Limited Warrranty USLimited Warranty Canada

RTDVD1 specifications

The RCA RTDVD1 is a budget-friendly home theater system that combines the features of a traditional DVD player with modern surround sound technology, designed to enhance your multimedia experience. This compact system is perfect for individuals or families looking to upgrade their home entertainment setup without breaking the bank.

One of the standout features of the RCA RTDVD1 is its built-in DVD player, allowing users to enjoy their favorite movies and TV shows from the comfort of their living rooms. The system supports a variety of disc formats including DVD, DVD-R/RW, and CD, ensuring that a wide range of content is accessible. The inclusion of a DVD player eliminates the need for multiple devices, simplifying the entertainment setup.

The RTDVD1 is equipped with a 5.1-channel surround sound system, which offers an immersive listening experience. This feature is ideal for movie enthusiasts and gamers alike, as it allows sound to be channeled through multiple speakers placed strategically around the room. The speakers produce crystal-clear sound quality, enhancing the overall viewing experience by delivering rich audio with deep bass and detailed highs.

Another notable characteristic of the RCA RTDVD1 is its user-friendly interface. The system comes with a remote control, making it easy to navigate through menus, adjust volume levels, and switch between different inputs without having to get up from your seat. The simple design ensures that even those who are not tech-savvy can operate the system with ease.

Connectivity options are also an essential aspect of the RCA RTDVD1. The system includes multiple inputs, such as HDMI, composite, and optical audio outputs, making it compatible with a variety of devices. Whether you want to connect a gaming console, streaming device, or additional speakers, the RTDVD1 provides flexible options for integration.

In conclusion, the RCA RTDVD1 is an impressive home theater system that offers value for money with its built-in DVD player, 5.1 surround sound capability, and easy-to-use interface. Its various connectivity options ensure compatibility with multiple devices, making it a suitable choice for anyone looking to elevate their home entertainment experience.
Top Page Image Contents