Linking Games

Some games include an Ethernet cable and a crossover connector used to link games together. By linking your games, players can play compete against one another in real-time interactive play. Follow the instructions below to link your games. The software will allow

up to 8 games to be linked.

NOTE: One Ethernet cable is required for each game you are linking. Additional Cat- 5 UTP RJ45 Ethernet cables can be pur- chased at your local computer store.

1.Turn off and unplug the games.

2.Connect one end of the supplied Ethernet cable to the Ethernet connec- tor on the outside of the game. The Ethernet connector is the one on the left if you are facing the back of the game. (If you are linking a Vibe or EVO, the Ethernet connector is the on the right.)

3.Connect the second Ethernet cable to the Ethernet connector on the outside of the second game.

NOTE: If you are linking games to a Combo Jukebox or a MegaTunes unit, the free ends of the Ethernet cables from the games will connect directly to the Ethernet ports on the jukebox or MegaTunes unit. If you are link- ing more than 2 games and a jukebox, or more than 3 games and a MegaTunes, you will need to connect an Ethernet cable to the hub connector on the jukebox or MegaTunes unit and plug the free ends of all of the cables into a hub.

MegaTunes: The Ethernet ports are located on the Ethernet hub mounted to the single board computer (SBC). The 4 ports on the right are all for Ethernet, the port on the left is for connecting a hub only. Loosen the 2 thumbnuts securing the front access panel. Connect the Ethernet cable to one of the Ethernet ports and replace the front access panel routing the cable through the slots at the bottom of the access panel.

Combo Jukebox: There are two available Ethernet couplers, labeled “Mega-Link”, on the upper left if you are facing the back of

the jukebox.

4.Linking two games: Plug the free ends of both the Ethernet cables into the crossover coupler.

Linking more than two games: Pug the free ends of the Ethernet cables into a 10 BASE-T Ethernet hub (available from your distributor as a separate part num- ber (EC0030-01), or at your local com- puter store).

5.Plug in the games and turn on the power. If installation was successful, you will see a Mega-Link® button displayed on the screen after the menu appears.

NOTE: The Mega-Link® icon will appear on the game only when 2 or more games are linked.

NOTE: If a MegaTunes unit has been linked to a game, the music will be downloaded to the game. This download time will vary de- pending on the amount of music being down- loaded.

NOTE: Megatouch games that are con- nected using the Mega-Link™ system must have the same level of software for proper operation. The software is designed to de- tect other levels of software in linked games. If a different level is detected, you will re- ceive a screen that says, “MEGALINK MIS- MATCH CALL ATTENDANT.” This screen will be displayed approximately 5 minutes after you turn the games on. To clear the screen and continue playing the games, you must turn the power off, unlink the games, and turn the power back on again. If you want to link these games you must upgrade all games to the same software level.

PM0425-04

MEGATOUCH FORCE FUSION OWNER’S MANUAL

PM0425-04 specifications

The Mega System Tech PM0425-04 is an advanced multipurpose device that has gained recognition for its impressive performance and versatility in a variety of applications. Designed primarily for industrial and technological uses, this device stands out due to its robust construction and cutting-edge features that maximize efficiency and productivity.

One of the main characteristics of the PM0425-04 is its high processing power, which is achieved through the incorporation of a state-of-the-art microprocessor. This ensures rapid data processing and seamless operation even under heavy workloads. The device supports a wide range of operational demands, making it suitable for use in sectors such as manufacturing, automation, and telecommunications.

In terms of connectivity, the PM0425-04 is equipped with multiple communication ports, including USB, Ethernet, and serial interfaces. This allows for easy integration with existing systems and enables the device to communicate effectively with various peripherals. The support for various communication protocols enhances its utility in diverse industrial settings.

Another remarkable feature of the PM0425-04 is its scalability. Users can easily expand its functionality by installing additional modules or software upgrades. This adaptability means that the device can grow alongside the evolving needs of a business, making it an economical long-term solution.

The device is designed with user-friendliness in mind. Its intuitive interface simplifies operation and reduces the learning curve for new users. The PM0425-04 also includes advanced diagnostic tools that help in troubleshooting and maintenance, thereby reducing downtime and enhancing overall efficiency.

Power efficiency is another critical characteristic of the PM0425-04. Designed to consume minimal energy during operation, it adheres to modern environmental standards, making it a sustainable choice for businesses looking to reduce their carbon footprint.

In summary, the Mega System Tech PM0425-04 is a multifunctional device that combines high performance, flexibility, and energy efficiency. Its advanced features and capabilities make it an ideal choice for businesses seeking to enhance their operational efficiency and adaptability in a rapidly changing technological landscape.