Arcam Logo manual Connection, Sub/full range+sat system, Stereo system with no LFE, Sub/sat system

Page 6

connection

Sub/full range+sat system

 

 

 

 

This is a surround-sound system (such as Arcam’s

 

 

 

 

Solo Movie 5.1) where full range L and R speakers

 

 

 

 

are combined with satellite (or with full range) rear

 

 

LS

RS

speakers.The system should be connected with

 

PRE OUT SUB

 

 

 

 

both the Sub, Subwoofer or LFE output connected to

 

PRE OUT RIGHT

 

 

 

PRE OUT LEFT

 

 

IN LFE and Left/Right preamplifier outputs attached to

 

 

 

 

 

 

 

IN L/IN R on Logo.

 

 

 

 

In such systems, Logo can be set up to work with two

 

 

 

 

crossover frequencies. One frequency is set up for the

 

 

 

 

rear speakers using the surround amplifier crossover,

 

 

L

 

and one frequency for the full range Left and Right

 

 

 

 

 

C

R

speakers, using the Logo crossover.

IN R

IN L

 

 

 

 

 

 

 

IN LFE

 

 

Direct mode in Arcam surround amplifiers

Stereo system with no LFE

This is a typical two-channel system (such as Arcam’s Solo). Logo is connected to L/R preamplifier outputs. The crossover frequency on Logo should be adjusted to the low frequency roll off of the main speakers (see the manual for your speakers for this information).The Q-control (X-OVER Q) can be used to fine-tune the integration of Logo and your main speakers.

L-

L+

L+

L-

 

 

R+

R-

PRE OUT

PRE OUT

 

 

RIGHT

LEFT

R-

 

R+

IN L

 

IN R

If you wish to have your system set up to use the crossover in the surround amplifier for 5.1 or 7.1 material, but use Left and Right full range speakers with Logo filling in for two-channel material, you can use Direct mode.

Connect the amplifier and Logo as in the Sub/full range+sat system diagram. In the amplifier, set up all speakers to ‘Small’; this redirects bass to Logo via the LFE channel.To use the system’s full range, activate ‘Direct mode’ for two-channel sources.This sends the full range signals to the Left and Right speakers and use the IN L/IN R inputs to Logo via its own crossover.

Sub/sat system

This is a surround-sound system (such as Arcam’s

 

Solo Movie 5.1) where all the main speakers are

 

satellite speakers, defined as ‘Small’. Logo is connected

 

to output marked Sub, Subwoofer or LFE.

PRE OUT SUB

The LFE input bypasses the crossover in Logo, so the crossover frequency should be set by the surround sound amplifier. For the crossover setting, please see the response of your satellite speakers which may vary from around 70Hz for large satellites, to 150Hz for small satellites.We recommend 80Hz as a starting point if you are unsure.

IN LFE

LS

RS

L

 

C

R

E-6

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Handbook Manuel Handbuch Handleiding Safety compliance Safety GuidelinesImportant safety instructions Keep this handbook for future referenceContents Installation Subwoofer Speaker setupRoom acoustics Speaker standsStereo system with no LFE ConnectionSub/full range+sat system Sub/sat systemSetting Recommended settings for use with Muso speakersCalibration Specification

Logo specifications

The Arcam Logo is a noteworthy advancement in the world of additive manufacturing, particularly in the field of metal 3D printing. Developed by Arcam, a company known for its pioneering work in electron beam melting technology, the Logo is designed to provide high-quality and efficient metal part production, catering primarily to industries such as aerospace, medical, and mold making.

One of the standout features of the Arcam Logo is its use of electron beam melting (EBM) technology. This innovative process utilizes a focused beam of electrons to melt metal powder layer by layer, allowing for the creation of complex geometries that traditional manufacturing methods cannot achieve. By leveraging EBM, the Arcam Logo enables manufacturers to produce lightweight structures with intricate designs, which is particularly beneficial in applications where weight reduction is critical.

Another significant characteristic of the Arcam Logo is its ability to utilize a wide range of metal materials, including titanium, cobalt chrome, and other alloys. This versatility makes it suitable for various applications, from producing custom implants in the medical field to crafting high-performance aerospace components. The machine's software is also designed to optimize the printing process, resulting in improved surface finishes and reduced post-processing time.

The Arcam Logo incorporates advanced features such as an integrated powder handling system that enhances efficiency and safety during the printing process. This system minimizes powder exposure to operators while ensuring optimal powder management, which is crucial for maintaining the quality of the printed parts.

Additionally, the Arcam Logo's user-friendly interface simplifies the operation and monitoring of the printing process. Operators can easily manage print jobs, review production parameters, and make necessary adjustments in real time, ensuring that the manufacturing process is smooth and efficient.

In summary, the Arcam Logo stands out in the realm of metal 3D printing through its advanced electron beam melting technology, versatile material capabilities, and innovative features that enhance efficiency and user experience. As industries continue to seek more efficient manufacturing methods, the Arcam Logo represents a significant step forward in producing high-quality metal parts with unparalleled design freedom.
Top Page Image Contents