
ASSEMBLY: Here are the
1. Connect the right side and left side of the center post by snapping the two pieces together. This is a
a.
PLAY FEATURES: Keep the fun spinning in “Music”, “Giggle”, or “Counting” mode! Here are some play suggestions to get you started:
NOTE: This toy is packaged in “demo” mode. To enable full play features, switch to “play” DEMO OFF PLAY mode located on the underside of toy.
1.
Press Here
2.
2. Use a Phillips (cross) head screwdriver (not included) and 2 screws (included) to connect the turn handle to the top of the center post. The screws connect on the sides of the turn handle as shown.
3. Place the center post/ turn handle into the SIT ‘N SPIN base as shown. Flip the SIT ‘N SPIN base over and use a Phillips (cross) head screwdriver and 1 screw (included)
to connect the center post/ turn handle to the base.
b.
Note: Check to be sure that all assembled parts are securely attached before using the toy.
Note: For best performance, child should be seated on one of the two designated seating areas marked with the yellow star.
“Music”, “Giggle”, or “Counting” mode – it’s your choice!
1. Push the
Music Mode
Dora will start to talk and encourage a sing along.
Giggle Mode
In this mode, Dora will giggle and laugh as your child spins ‘round and ‘round!
Counting Mode
In this mode, Dora will count each revolution your child makes on the SIT ‘N SPIN. Your child can count along in English and Spanish! Once Dora has counted up to five, she returns to the initial “Music” mode.
seating areas
NOW YOU’RE READY TO PLAY!
NOTE: Toy will automatically cycle through all modes of play, even if
2.This toy also features “sounds off” mode for quiet play! Simply move the switch at the bottom of the toy to “off”.
3.After 30 seconds of inactivity, the toy will automatically shut off. To play again, simply spin the base. When storing, make sure the