PARTS:
Athreshold
Bleft fence panel/door C right fence panel
D left front support E right front support F right rear base
G left rear base
H fabric dome with rods I 3 balls
J circle K square L triangle M 2 links N phone
O fish rattle
P spider teether Q monkey rattle
Rmailbox shape sorter (2 pieces) with 3
S12 washer head screws
A
B
D
F
H
C
E
I J 
M 
R 
K
L
G
N 
O 
P 
Q 
S 
ASSEMBLY:
NOTE: You will need a Phillips/cross head screwdriver (not included) for proper assembly.
STEP 3: Turn the unit over and secure the left and right front supports and threshold by inserting washer head screws in each screw point as shown. Turn unit
STEP 1: Slide the threshold into the left fence panel/ door as shown. Attach the right fence panel to the other side of the threshold as shown.
NOTE: You will hear a “snap” when these pieces are properly connected.
bottom rod
top rod
STEP 2: Place the left front support under the left fence panel/door. Gently press fit left fence panel/ door down onto left front support as shown. Repeat step for right front support and right fence panel.
STEP 4: Lie the fabric dome out flat as shown. Lift the top of the fabric dome up and connect all 4
NOTE: Rods are made to flex for increased ease of assembly. You may need to slide the fabric up on the rods to assemble posts.