SCREW
DIAL
HOLE
4. Dial
With body/chassis on its side, insert dial into recess. Turn body so that underside of chassis faces you. Insert #6 screw with attached washer into hole, and tighten with Phillips/cross head screwdriver.
ANTENNA 
HOLE
6. Antenna
Antenna fits only one way. Insert end of antenna into hole.
SPINNER
SPINNER
PIECE
ROLLER
RECESSED
AREA
5. Roller
Turn body/chassis right side up and lower chassis onto body. Insert posts on roller into holes in recessed area (smaller post into smaller hole, larger post into larger hole).
GEAR SHIFT
RECESSED
AREA
7. Gear Shift
Gear shift fits only one way. Inserts posts on gear shift into holes in recessed area (smaller post into smaller hole, larger post into larger hole).
8. Spinner
Slide slots on each spinner piece into each other until they snap into place. Snap assembled spinner into recessed area.
RECESSED 
AREA