To Attach to Crib, To USE, To Replace Light Bulb

TO ATTACH TO CRIB

CAUTION: When toy is used in crib, the crib sides should be raised and the crib mattress should be in one of the lower positions.

1. Position toy inside crib near top rail.

2. Place straps around top crib rail, and, with toy firmly in place, fit tabs on toy through holes in straps.

This soothing crib or table-top toy eases baby’s transition to bedtime with colorful moving images and comforting lullaby music.

	• Choose the settings!	C
	A Music Timer. Slide switch to select the
		B
	length of time the music plays.

adjust volume of music.

CLight Switch. Switch in ON position allows

	light-up features to work when music plays.	A
	For music only, slide switch to OFF to shut	A
	For music only, slide switch to OFF to shut
	off light-up features.

APress the yellow star to set the fun in motion!

C A

BFriendly, nighttime images scroll across the glowing "pages"!

CYour GLOWORM friend lights up! 6 soothing lullabies to calm and comfort baby!

DLI’L GLOFRIENDS characters light up and giggle…press the bookmark to see!

(Light bulb should be replaced by an adult.)

1.On back of toy, loosen screw that attaches light bulb cover to toy (screw will remain attached to toy).

2.Slide light bulb holder out of cover.

3.Twist light bulb cap and remove from holder.

4.Discard old bulb and replace it with a new PR-3 light bulb.

5.Twist cap onto holder, slide holder into toy and tighten screw.

SCREW

CAP

BULB

HOLDER