ENGLISH
alternate with the monthly mean temperature.
: In the center of the LCD, theTIMEcurrent hour, minute and sec- onds are shown for the selected time zone. (The time will adjust as the globe is turned.) If the alarm function is set, the display shows the alarm time.
DATE AND DAY OF THE WEEK: | |
The date and day of the week in | |
a time zone are shown below the | |
time display. You can select from | |
two formats, | or |
5.USING THE
BUTTONS
SETTING YOUR LOCAL
TIME AND DATE
First check that the alarm is off. (No bell should be on the display.) If the alarm is enabled, press ALARM once to disable it.
Next position the Time Zone Bar by the city or location you are in. (You can verify that you have positioned the bar appropri- ately by pressing . Names of
Next the flashing | indicator | |||||
tells you to set the date, begin- | ||||||
ning with the year. Press | UP | or | ||||
DOWN until you arrive at the cor- | ||||||
rect year, then | press | SET. Then | ||||
use the UP or | DOWN | buttons to | ||||
scroll to the correct month, and | ||||||
press | SET. Finally, | press | UP | or | ||
DOWN | to input the | day | of | the |
month, and press . (The day of the week adjustsSETautomatical- ly according to the date you have set.)
ENGLISH Or, after setting the time and date and pressing , you’ll see
that either 12 SETor 24 appears then atHOURthe top ofHOURthe
screen. Press or repeat- edly to selectUPthe DOWNdesired date and time formats, and then press
. (If you don’t wish to changeSET the current setting, sim- ply press .) To escape this menu, pressSET twice, or wait 10 seconds untilSETthe LCD returns to the main display.
YYYY/DD/MM). | MM/DD/YYYY | |||
DST: | If the city you have | |||
selected operates | on | Daylight | ||
Saving Time, World Time Globe | ||||
Mini | automatically | adds one | ||
hour to standard time and dis- | ||||
plays DST on the LCD. If a city | ||||
doesn't | operate | on | Daylight | |
Saving Time, or if | DST is not cur- | |||
rently in effect for that location, | ||||
World Time Globe Mini knows | ||||
to subtract an hour to revert to | ||||
standard time. (You can also | ||||
enable or disable the | DST func- |
tion if necessary. See page 10.)
cities which shareCITY your time zone should appear consecutive- ly on the screen.)
Then press . (
should appear atSETthe topSETofTIMEthe display and the hour digit will
flash.) Use the or but- tons to scroll throughUP DOWNthe num- bers until you arrive at the cor- rect hour, and press . (If you don’t need to changeSETthe hour,
simply press a second time to jump to theSETminutes.) Next the minutes will flash. Press or
to scroll through numbersUP untilDOWNyou arrive at the correct minutes. (If you don’t need to change the minutes, simply press SET a second time to jump to the
8 date.) Press SET.
CHOOSING 12- OR 24 HOUR | ||
CLOCK AND DATE DISPLAYS | ||
You can choose to have the | ||
time displayed | according to | |
either the 12 or the 24 hour clock | ||
system. You can also choose | ||
between two formats for display- | ||
ing the date, YYYY/MM/DD or | ||
DD/MM/YYYY. | (For example, | |
2003 4 29 can be changed to 29 | ||
4 2003.) With the alarm dis- | ||
abled, press | SET six times until | |
12 HOUR or | 24 HOUR appears at |
the top of the screen. Press or repeatedly until bothUPthe timeDOWNdisplay and the date display are in the format you prefer. You
can press to exit this menu, or simply SETwait 10 seconds until the main display returns to the screen.
CHOOSING FAHRENHEIT OR | ||
CENTIGRADE |
| |
When the alarm is disabled, | ||
press SET repeatedly until either | ||
FAHR or CENT appears at the top | ||
of the screen. Next push | UP or | |
DOWN once to select the alternate | ||
temperature | indicator. | Then |
press SET, or just wait ten sec- | ||
onds, allowing the LCD to return | ||
to the main display. |
| |
Or, after setting the time, date | ||
and 12 or 24 hour clock, you’ll | ||
see that either CENTIGRADE or | ||
FAHRENHEIT will flash at the top | ||
of the display. You can use the | ||
UP or DOWN buttons also at this | ||
time to change the setting, and | ||
then press | SET. (If you don’t | |
wish to SET | change the current | |
9 setting, simply press SET.) |
|