JVC XT-UXG66R, UX-G66R Presetting Stations, To preset stations manually Manual Preset

Page 18

Continued

Presetting Stations

You can preset up to 30 FM and 15 AM (MW/LW) stations into memory by following two methods: manual/automatic presettings.

•There is a time limit in doing the following steps. If the setting is canceled before you finish, start from step 1 again.

To preset stations manually — Manual Preset

1 Press 4/ ¢(lower/higher frequencies) button to tune in the desired station manually.

2 Press SET button.

“SET” appears in the display window for a while (not blinking).

•Note that “SET” message disappears, presetting procedure is cancelled.

3 Rotate MULTI JOG dial or press repeatedly UP/ DOWN button to select the preset channel numbered from 1 to 30 on FM, or 1 to 15 on AM.

•Note that the selected channel “02” disappears, presetting procedure is cancelled.

4 Press SET button again.

“STORED” appears in the display window for a while.

5 The tuned station in step 1 is now stored in the preset channel selected in step 3.

Storing a new station on an used channel erases the previously stored one.

To preset stations automatically — Auto Preset

You can automatically preset 30 FM, 15 AM (MW/LW) stations. Preset numbers will be allocated as stations are found, starting from the lowest frequency and moving up to the higher frequency.

On the remote control only:

1 Press FM/AM button to select a desired band.

2 Press and hold AUTO PRESET button on the remote control for more than two seconds.

The system automatically starts searching for stations with the strong signals continuously, and they are stored successively into memory as follows:

Ç

Ç

Ç

When you unplug the AC power cord or if a power failure occurs

The preset stations will be erased in a few days.

If this happens, preset the stations again.

To change the FM reception mode

•When an FM stereo broadcast is hard to receive or noisy, press FM MODE button on the remote control so that MONO indicator lights in the display window. Reception improves.

•To restore the stereo effect, press FM MODE button again so that STEREO indicator lights in the display window.

In this stereo mode, you can hear stereo sounds when a program is broadcast in stereo.

15

Page 17 Page 19
Image 18
Page 17 Page 19
Contents UX-G66R STANDBY/ON lamp 15 cm10 cm Class Laser Product Precautions IntroductionContents Location of the Buttons and Controls Front PanelsDisplay window Stereo Amplifier Compact Disc/TunerRemote Sensor Remote ControlTo operate the system correctly using the remote control For Tuner operations, press FM/AM button onWhen connecting the system control cables to the connectors Putting the Batteries into the Remote ControlConnecting the System Control Cables and the External Wire Getting StartedSupplied FM antenna Connecting MD Recorder XM-G6 Connecting AntennasConnecting Sub Woofer System To connect an outdoor FM antennaTo connect an external AM antenna Connecting SpeakersAM antenna Close the speaker terminal on the rear of the unitTo Analog Connecting Other EquipmentsAC wall outlet To audio outputBasic Settings Setting the ClockSetting the Display Illumination Dimmer Using button Turning On the Power and Selecting the SourcesAdjusting the Volume Common OperationsTo adjust the treble Adjusting Bass and Treble SoundsTo adjust the bass Reinforcing the Bass SoundWhen turning off the system Press AUX button to select an external sourceInner Buttons Preset Station Tuning Tuning in a StationAuto Tuning Listening to FM and AM BroadcastsTo preset stations automatically Auto Preset Presetting StationsTo preset stations manually Manual Preset To change the FM reception modeReceiving FM Stations with RDS Changing the RDS InformationSwitching to a Program Type Temporarily Searching for Programs by PTY Codes PTY SearchHow the EON function actually works More about the EON functionDescription of the PTY codes Press 0open/close button again Playing Back a CDPlaying Back the Entire Disc Normal Play Press 0open/close button on CD unitTo go to another track Programing the Playing Order of the Tracks Program PlaySearching and Skipping Tracks To search and skip to a particular point in a trackTo erase all the programed data To exit from the Program play modeTo check the program contents To modify the programPlaying at Random Random Play To exit from Random play modeTo exit from Repeat play mode Repeating Tracks Repeat PlayPlaying Back a Tape Press 0open/close button on the cassette deck unitDo not use tapes longer than 120 minutes Playing Back Dolby-Recorded Tape Fast-Winding a TapeMusic Scan To skip forward to the next musicRecording onto a Tape Manual Recording onto a TapePress REC Pause button on the cassette deck unit Recording in Auto Reverse Synchronized Recording from a CD Recording from the External EquipmentRecording an external audio source manually Using the Timers Using Recording TimerHow Recording Timer actually works To use the same Recording Timer settings repeatedly Using Daily TimerHow Daily Timer actually works After completing the settingsTo use the same Daily Timer settings repeatedly Daily timer indicatorSleep Timer has priority over Daily Timer Using Sleep Timer Timer PriorityHow Sleep Timer actually works Recording Timer Sleep Timer Daily TimerMaintenance and Additional Information Handling CDsGeneral Notes Handling Cassette Tapes Types of Cassette Tapes Troubleshooting Possible CauseStereo Amplifier AX-UXG66 SpecificationsSupplied Accessories Cassette Deck0201JTMMDWJSC

UX-G66R, XT-UXG66R specifications

The JVC XT-UXG66R, also known as the UX-G66R, is an innovative mini audio system that reflects JVC's commitment to delivering high-quality audio performance and modern convenience. Designed to fit seamlessly into various home environments, this compact yet powerful system is perfect for music enthusiasts who crave both space-saving design and impressive sound quality.

One of the standout features of the UX-G66R is its versatile playback options. The system includes a CD player that supports various formats, allowing users to enjoy their favorite music in optimal quality. Additionally, the UX-G66R is equipped with a built-in USB port, enabling easy connections to external devices such as USB flash drives and smartphones. This functionality ensures that users can play their digital music files effortlessly, making the system a central hub for all audio needs.

The audio quality of the UX-G66R is further enhanced by JVC's advanced sound technologies. The system is engineered with high-performance speakers that deliver a rich and immersive sound experience. The integration of a powerful amplifier ensures that audio playback is dynamic and clear, regardless of the volume level. For those who appreciate deeper bass, the UX-G66R features a dedicated subwoofer that dramatically enhances low-frequency performance.

Connectivity is another key aspect of the JVC XT-UXG66R. It offers Bluetooth capability, allowing users to pair their smartphones or tablets with the system wirelessly. This convenience facilitates streaming from various applications such as Spotify, Apple Music, and more, providing endless entertainment choices. Additionally, the system includes an input for an auxiliary device, making it compatible with a wide range of audio sources.

In terms of design, the UX-G66R boasts a sleek, modern aesthetic that can complement any interior décor. The user-friendly interface includes intuitive controls and an easy-to-read display, simplifying navigation for users of all ages. Furthermore, the compact size of the system allows it to fit conveniently on shelves, desks, or in tight spaces without sacrificing audio quality.

Ultimately, the JVC XT-UXG66R, UX-G66R is an exceptional mini audio system that combines versatility, high-quality sound, and modern connectivity features. Whether you are listening to CDs, streaming music via Bluetooth, or enjoying tracks from a USB device, the system ensures a superb audio experience that caters to today's diverse listening habits.
Top Page Image Contents