Cleaning, Storage, Replacement Parts

Helmet Owners Manual Art.REV2 4/20/04 11:15 AM Page 8

GIANT HELMETS OWNERS MANUAL

2.If your helmet is equipped with Giant’s standard visor it is attached to the helmet by 4 mounting pins at the extremes of the visor (fig. 10). To remove it, grasp the visor firmly at the same point as the pins on one side. Place your other hand on the helmet shell where the pins attach to the shell. Pull the visor away from the helmet until the pins come free from the shell. Repeat on the opposite side.

3.To replace the visor, center the visor at the front of the helmet then snap the pins into the holes in the helmet shell.

4.If your helmet is equipped with Giant’s Center-punch™ visor, grasp the helmet with one hand, and with the other grasp the center of the visor. Pull the visor away from the helmet

5.To re-attach the Center- punch™ visor, align the post at the back of the visor with the receiver on the brow of the helmet. Insert the post

into the receiver. Firmly push the visor towards the helmet until you feel the post click into the locked position. Check that the visor is fully locked in position by lightly pulling on the visor. The visor should not pull out easily.

RECEIVER

	9
POST	Figure
POST

		10
PINS	HOLES	Figure
	HOLES

CLEANING

Helmets are made of materials that can be easily damaged by many household cleaners.

Petroleum-based solvents are especially dangerous. They can damage a helmet so that its protective capabilities are significantly reduced.

For best results, use only a soft cloth or sponge, warm water and mild soap to clean your helmet.

STORAGE

After each use, wipe excess dirt off your helmet with a soft cloth. If you clean it according to the instructions above, allow it to air dry and then store in a cool, dry place. Excessive heat and direct sunlight can damage your helmet. Damaged helmets will appear to have uneven or bubbly surfaces.

WARNING!

NEVER use your helmet if you suspect that it has been damaged by heat or sun exposure.

REPLACEMENT PARTS

Contact your local Giant Retailer or call Giant’s Customer Services department at 805-267- 4668 concerning replacement parts or for answers to any questions you may have concerning Giant products.

CRASH REPLACEMENT POLICY

If your helmet is involved in an accident, you may obtain a same or similar replacement from Giant by doing the following:

Securely package and ship prepaid the following:

a. your damaged helmet;

b. a copy of your dated cash register receipt;

c. a letter describing your accident (in as much detail as possible); and

d. a check for $20.00 made payable to:

Giant Bicycle, Inc.

Customer Service

3587 Old Conejo Rd.

Newbury Park, CA 91320

HELMETS specifications

Giant helmets have emerged as a pivotal component in the cycling industry, providing safety, comfort, and style. These helmets are designed with a variety of innovative features and technologies that make them stand out in a crowded market.

One of the primary characteristics of Giant helmets is their use of advanced materials. The outer shell is often made from polycarbonate or other lightweight, impact-resistant materials which offer durability without adding significant weight. This is crucial for cyclists who often need to prioritize performance and comfort during long rides.

Ventilation is another important feature of Giant helmets. Many models are equipped with strategically placed vents that promote airflow, keeping riders cool even in challenging conditions. The designs often incorporate a special aerodynamic shape which minimizes drag, allowing for a smoother ride.

Safety technologies are paramount in Giant helmets. Many are designed with the MIPS (Multi-Directional Impact Protection System) technology, which provides additional protection against rotational forces during an impact. This system allows the helmet to rotate slightly on impact, reducing the amount of energy transferred to the brain, thus enhancing safety significantly.

Adjustability is another hallmark of Giant helmets. Most models come with a fit adjustment system, enabling cyclists to customize the fit for maximum comfort. This can include features like a rear dial system or additional padding options that allow for a personalized fit, ensuring that the helmet stays securely in place during rides.

Moreover, visibility is enhanced with integrated reflective elements in many Giant helmets. This is a crucial feature for cyclists who often ride in low-light conditions, as it helps increase safety by making riders more visible to motorists.

Aesthetic diversity is also a strong point, with Giant offering a range of colors and designs. This variety ensures that there is a helmet suitable for every cyclist's style and preference, from competitive racers to casual riders.

In summary, Giant helmets combine comfort, safety technology, adjustable features, and stylish designs to cater to cyclists of all levels. With a focus on innovation and user experience, they continue to set a high standard in the cycling helmet market, providing riders with peace of mind and enhanced performance on the road.