Star Trac ip-l8505 manual Required Tools, General Notes, Packaging Removal

Page 11

INSTALLATION INSTRUCTIONS

REQUIRED TOOLS:

• 13mm Box / Open-End Wrenches •• • • • • •• • • • • • • • • • • •

2

• 17mm Box / Open-End Wrenches • • • • • • • • • • •• • • • • • • • •

2

GENERAL NOTES:

•Unless otherwise noted Loctite 242/243 or equivalent thread locker must be used on all threaded fasteners. (Do not use thread locker when a Nyloc nut is used.)

•All Star Trac Strength equipment MUST be secured to the floor using either 10mm or 3/8in. (grade 5 minimum) bolts. To accommodate this there are four mounting points inside the weight stack and one in either of the small feet.

•This Installation Instructions Manual must be used in conjunction with the equipment’s Owner’s Manual. The Owner’s manual describes equipment setup and instructs members on how to use it correctly and safely.

•The Max Rack requires at least two people to perform the installation.

THREAD LOCKER APPLICATION: Clean all threads and holes, apply no more than 3-4 drops per bolt.

Thru HolesBlind Holes

Metric Steel Bolts Torque Specifications

 

Bolt Size

Thread Pitch

Torque, N-m (lbs-ft)

 

 

 

 

 

6mm

1.25

10 to13.5 (8 to10)

 

 

 

 

 

8mm

1.25

25.5 to 28.5 (19 to 21)

 

 

 

 

 

10mm

1.75

55.5 to 58 (41 to 43)

 

 

 

 

 

12mm

1.25

61 to 65 (45 to 48)

 

 

 

 

•

Torque all hardware to values as specified above, unless noted otherwise.

•

See Page 11 of this manual for fastener sizing information; for reference only.

•

Note: All torque values are in N-m unless otherwise stated.

 

Should any component not be present or if you have any operational questions, please refer to your owner’s manual or on the web @ www.startrac.com . Specifically refer to your Inspiration serial number and model number labeled on your equipment.

PACKAGING REMOVAL:

Carefully remove all packaging materials that wrap the equipment. DO NOT USE A KNIFE OR BOX CUTTER AS YOU MAY DAMAGE THE EQUIPMENT. At this time remove any sub-components from the pallet and set aside for later assembly.

Page 11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Installation Instructions Page Table of Contents Safety Instructions Page Page Exercise Guidelines Maintenance and Service Warranty Coverage Exclusive warranties Packaging Removal Required ToolsGeneral Notes Unpack the MAX Rack and Assemble Upper Weldments Assemble Uprights Move Main Assembly Upright Main AssemblyInstall Lower Braces Install Weight HoldersInstall BAR Holders Install Back BraceInstall Bearing Mounts to BAR Install Upper Guide RodsInstall Safety Stops Install the Lower Guide Rods Install Weight Horns Page Machine Clearance and Spacing Final Assemble Check SheetPage Star Trac

ip-l8505 specifications

The Star Trac IP-L8505 is a state-of-the-art indoor cycle designed for fitness enthusiasts and commercial gyms alike. This bike is part of the renowned Star Trac line, recognized for its premium quality and innovative technology. The IP-L8505 is tailored to meet the evolving demands of group training sessions while ensuring an engaging and effective workout experience.

One of the standout features of the IP-L8505 is its advanced connectivity options. The bike supports Bluetooth technology, enabling users to sync their devices and access a wide array of fitness apps that enhance their training sessions. This feature not only provides real-time feedback but also personalizes the workout experience by allowing users to track their progress over time.

The bike is equipped with an intuitive console that features a high-resolution touchscreen display. This user-friendly interface shows essential metrics such as time, distance, calories burned, and heart rate, allowing users to monitor their performance effortlessly. The console also offers users access to a variety of pre-programmed workouts, catering to different fitness levels and goals.

In terms of construction, the Star Trac IP-L8505 boasts a durable frame designed for stability and longevity. The bike is designed to withstand the rigors of daily use in a busy gym environment, making it a reliable choice for gym owners. The heavy-duty flywheel ensures a smooth and consistent ride, mimicking the real cycling experience and providing users with an enjoyable workout.

Another notable characteristic of the IP-L8505 is its adjustable seating and handlebars. This feature allows users of all shapes and sizes to find their ideal riding position, enhancing comfort during workouts. Additionally, the bike comes with dual-sided pedals, accommodating both cycling shoes and standard athletic footwear, providing versatility for users.

Safety is a priority with the IP-L8505, which includes features such as easy-to-reach brake levers and slip-resistant grips. These characteristics ensure that users can maintain control and stability during intense training sessions.

Overall, the Star Trac IP-L8505 combines cutting-edge technology with superior construction, making it a top choice for both individual users and fitness facilities seeking to upgrade their equipment offerings.
Top Page Image Contents