TO REMOTELY ADJUST THE DUAL-ZONE PIEZO SENSOR:
With the ignition turned OFF. Press buttons II and III simultaneously for three seconds. The system will respond with one chirp.
To adjust the warning level of the sensor, you must have the ignition turned ON, to adjust the trigger level of the sensor, turn the ignition OFF. Then:
∙Press button II to decrease sensitivity. A single chirp confirms each decrease in sensitivity.
∙Press button III to increase sensitivity. Two chirps confirm each increase in sensitivity.
∙Three chirps indicate that you are at the top or bottom of the 16 step incremental range.
Test your settings by lightly thumping on the motorcycle. One chirp signals an alarm trigger level detection, two chirps signal a warning level detection.
Press button I on the remote control to save the new settings.
10 | GP500 |