Keys Fitness HT85t owner manual Assembly, Parts List

Page 5

Assembly

The Health Trainer 85t Treadmill will require assembly before operating. After opening the box, remove any packing material from the treadmill.

Do not throw away any packing materials until the unit is working properly.

Place the base on a clean, level surface. Make sure the electrical cord will easily reach an electrical outlet.

Locate the hardware pack and identify the following parts required for assembly.

Parts List:

1.

Owner’s Manual

8. Left and Right Outside Handle Covers

2.

Base Assembly

9. Allen Wrench

3.

Console Assembly

10. Philip Screw M6x12 (Qty. 6)

4.

Left and Right Upright

11. Philip Screw ST4.2x13 (Qty. 8)

5.

Left and Right Fender

12. Allen Bolt M8x15 (Qty. 8)

6.

Safety Key (Reed Switch)

13. Washer 9x22x2 mm (Qty. 8)

7.

Left and Right Inside Handle Covers

 

5

Image 5
Contents Health Trainer 85t Treadmill Table of Contents Safety Precautions and Tips Important Safety InformationBefore You Start Parts List AssemblyAssembly requires the included allen wrench Assembly Assembly Congratulations Moving Instructions Power Requirements Calories / Distance Window Console Panel FunctionsProgram Operation Quick Start / Manual ModeProgram Mode Speed Incline 11INCLINE Program ProfilesMonitoring Your Heart Rate Monitoring Your Heart RateTarget Heart Rate Zone Exercise Guidelines Warm Up ExercisesChange to MPH or KPH Calibration Sequence Belt Adjustment To Apply Lubricant to the Walking Board Maintenance InstructionsTreadmill Error Messages Error MessagesTreadmill will not start Troubleshooting GuideREF# Keys PART# Description QTY Parts ListExploded View Console Assembly Wire Harness Keys Fitness PRODUCTS, LP Limited Warranty Warranty InformationCustomer Service