Assembly
The Health Trainer 65T Treadmill will require assembly before operating. After opening the box, remove any packing material from the treadmill.
Do not throw away any packing materials until the unit is working properly.
Place the base on a clean, level surface. Make sure the electrical cord will easily reach an electrical outlet.
Locate the hardware pack and identify the following parts required for assembly.
Parts List:
1. | Owner’s Manual | 7. | Left and Right Outside Handle Covers |
2. | Base Assembly | 8. | Left and Right Inside Handle Covers |
3. | Console Assembly | 9. Allen Wrench | |
4. | Left and Right Upright | 10. Philip Screw M6x12 (Qty. 6) | |
5. | Safety Key (Reed Switch) | 11. Philip Screw ST4.2x13 (Qty. 8) | |
6. | Left and Right Fender | 12. Allen Bolt M8x15 (Qty. 8) | |
|
| 13. Washer 9x22x2 mm (Qty. 8) | |
2
3
| 4 | 4 |
|
|
| 5 | |
|
|
| |
|
|
| 7 |
| 6 | 9 | 8 |
|
| 6 |
|
|
| 1 | 7 |
|
|
| |
|
|
| 8 |
10 | 11 | 12 | 13 |
|
5