Assembly
The Triumph Endurance Treadmill will require assembly before operating. After opening the box, remove any packing material from the treadmill.
Do not throw away any packing materials until the unit is working properly.
Place the base on a clean, level surface. Make sure the electrical cord will easily reach an elec- trical outlet.
Locate the hardware pack and identify the following parts required for assembly.
Parts List: |
|
|
| |
1. | Owner’s Manual | 8. | Left and Right Outside Handle Covers | |
2. | Base Assembly | 9. | Allen Wrench | |
3. | Console Assembly | 10. | Phillips Screw M6x12 (Qty. 6) | |
4. | Left and Right Upright | 11. | Phillips Screw ST4.2x13 (Qty. 8) | |
5. | Left and Right Fender | 12. | Allen Bolt M8x15 (Qty. 8) | |
6. | Safety Key (Reed Switch) | 13. | Washer 9x22x2 mm (Qty. 8) | |
7. | Left and Right Inside Handle Covers |
|
|
|
5