Keys Fitness KF-T6.0 Treadmill Error Messages, Safety Interlock Error Messages, Error code

Page 28

www.keysfitness.com

Treadmill Error Messages

Your treadmill is equipped with a software package that enables error messages to be displayed when there is a problem. The following error codes will be displayed in the console display windows.

Safety Interlock Error Messages

SI 1 - Safety key missing, replace and try again.

SI 2 - Over voltage protection trip. Notify Keys Fitness Customer Service.

Other Error Messages

E11 - Lack of speed feedback data from belt motor. Attempt calibration. See Calibration Sequence section on page 27 of this Owners Manual for detailed information.

E22 - Under Speed condition detected from the belt motor. Attempt calibration. See Calibration Sequence section for detailed information.

E33 - Over Speed condition detected from the belt motor. Attempt calibration. See Calibration Sequence section for detailed information.

E44 - Stuck key detected at power up, Notify Keys Fitness Customer Service.

E66 - Will blink on the incline window to indicate that treadmill belt needs to be re-lubricated. This message will be repeated every 30 hours.

To avoid possible damage to the treadmill and the possibility of injury, do not operate the treadmill until the problem is corrected. Call Keys Customer Service at 800-340-0482.

Clearing E66 Message

Once the belt has been properly lubricated (See maintenance instruction on page 30). You can clear the E66 treadmill belt lubrication reminder with the following steps:

1.Unplug power cord from outlet strip.

2.Attach safety key to console.

3.Plug power cord into outlet strip.

4.Press the (Speed +, Speed -, and Pause) keys simultaneously, then you will hear a beep.

5.The message E66 appears in the incline window and the number 30 appears in the speed window.

6.Press the Speed + and the Speed - and pause keys simultaneously for 4 seconds, then you will hear a beep.

7.The characters “---” will appear in the incline/speed window, flashing for 3 seconds.

8.The console turns off after operation is completed.

28 Error code

Page 27 Page 29
Image 28
Page 27 Page 29
Contents Keys Fitness Products Model Name KF-T6.0 Serial Number315 1-00 08/27 07/07Rev Rev4. A0Table of Contents Safety Precautions and Tips Safety InformationAssembly Www . keysfitness.com Parts IdentifierAssembly Assembly for Upright TubesStep Assembly for Fenders Assembly for END CapsAssembly for Console Step Congratulations Moving Instructions Moving InstructionsPower Requirements Power RequirementsConsole Information Console Functions Console InformationQuick Start / Manual Mode P1 Program ModeIncline + Speed +Cool Down Time Goal P2Distance Goal P3 Calories Goal P45K RUN and 10K RUN P5 P6 Programs P7 P13Frequency, Intensity, Time, Target Heart Rate Zone Workout Cool DownCool down Slow and Relaxed Exercise Target Heart Rate Zone Workout Information Prone on Elbows Cat and CamelKnees to Chest Shoulder CirclesWrist Extensor Wrist FlexorOne-Arm Pectoralis Stretch Groin Adductors StretchCalf Stretch Standing Quadriceps StretchTroubleshooting Calibrating Treadmill Treadmill Error Messages Safety Interlock Error MessagesOther Error Messages Error codeWalking Belt is Slipping During USE Diagram Belt AdjustmentBelt Adjustment Maintenance Instructions Maintenance InstructionTroubleshooting Guide Treadmill will not startParts Information View 145 141 132Exploded View / Parts List KF-T6.0 Parts List Rev a Ref # Description QtyWarranty Information Residential and Personal Use Limited Warranty
Top Page Image Contents