Assembly
Figure 5
Step 1
Carefully attach Console to Left and Right Uprights using Lock Washers D=8 (Qty. 6), Allen Bolts M8*15 (Qty. 6), and Allen Bolts M6*12 (Qty. 4).
Note: Be careful not to pinch any wires during this step.
Figure 6
Step 1
Connect the Console Harness (left side), Incline Harness (left side), EKG Harness (left and right side), and Speed Harness (right side) to Harness coming from Console.
Step 2
Attach the Left Junction Box as shown.
Step 3
Repeat for Right Junction Box.
Figure 5 | Console |
| |
Left Upright | Allen Bolt |
M8*15 | |
| Internal Lock Washer |
Allen Bolt | D=8 |
| |
M6*12 |
|
| Right Upright |
Figure 6 |
|
Console Harness |
|
| Left Junction Box |
| Console |
Left Upright | Left Junction Box |
| Right Upright |
8 |
|