JVC LVT1047-001A manual Connect the speaker cord to the speaker terminal

Page 4

Assembly (continued)

4 Connect the speaker cord to the speaker terminal.

•Each speaker can be used as front or surround speaker. Use the 5-meter speaker cords for front speakers and 10-meter speaker cords for surround speakers.

5 Route the speaker cord as shown below.

•Be sure to take out the slack so that the speaker cord lies flat.

Twist and pull the insulation coat to

remove.

Press and hold the

Insert the exposed

clamp.

core of the speaker

 

cord fully into the

 

terminal.

Repeat the procedure from step 1 to assemble the other satellite speakers.

Release your finger.

Black

White

Black

White

– 3 –

Page 3 Page 5
Image 4
Page 3 Page 5
Contents SP-F303- Consists of SP-F303F and SP-F303C Består of SP-F303F og SP-F303CContents Precautions for installationPrecautions for Daily Use Checking the supplied AccessoriesEnglish Assembling the satellite speakers AssemblyFix the stand to the speaker section Connect the speaker cord to the speaker terminal Route the speaker cord as shown belowConnecting the Center speaker Insert the speaker cord into the speaker terminal EnglishConnection Before connectingTypical connection method to an amplifier Specifications For a subwoofer to be used with SP-F303, it isVictor Company of JAPAN, Limited
Top Page Image Contents