Image Keys 4600T owner manual Power Requirements

Page 11

Power Requirements

Improper connection of the equipment grounding connector can result in a risk of an electric shock. Check with a qualified electrician or service man if you are in doubt as to whether the product is properly grounded. Do not modify the plug provided with the product. If plug will not fit the outlet, have a proper outlet installed by a qualified electrician.

This treadmill can be seriously damaged by sudden voltage changes in your home’s electrical power. Voltage spikes, surges, and noise interference can result from weather conditions or from other appliances being turned on or off. To reduce the possibility of treadmill damage, always use a dedicated surge protector (not included) with your treadmill.

Surge protectors can be purchased at most hardware stores. The manufacturer recommends a single outlet surge protector with UL 1449 rating as a Transient Voltage Surge Suppressor (TVSS) with UL suppressed voltage rating of 400V or less and an electrical rating of 120VAC, 15 amps.

This treadmill must be grounded to reduce the risk of electrical shock. Grounding provides a path of least resistance for electric current should the treadmill malfunction. This treadmill comes with an electrical cord with an equipment-grounding conductor and a grounding plug. Always plug the power cord into a surge protector, and plug the surge protector into an appro- priate outlet that is properly installed and grounded in accordance with all local codes and ordi- nances. Do not connect other equipment to the surge protector or this could cause permanent damage to your treadmill.

This product is for use on a nominal 120-volt circuit and has a grounding plug that looks like the plug illustrated in the drawing below.

11

Image 11
Contents Keys 4600T Treadmill Table of Contents Safety Precautions and Tips Important Safety InformationBefore You Start Parts List AssemblyAssembly requires the included allen wrench Right Upright Attach the Left Junction Box as shown Congratulations Moving Instructions Power Requirements Console Panel Functions Program Operation Quick Start / Manual ModeEnter Program Start / Stop Pause Power Incline Customizing Programs in P1 and P2 Mode Program Mode3 4 5 6 7 8 9 1 Program ProfilesPage Monitoring Your Heart Rate Target Heart Rate ZoneExercise Guidelines Warm Up ExercisesChange to MPH or KPH Calibration Sequence Walking Belt is Shifting to the Left Diagram Belt AdjustmentTo Apply Lubricant to the Walking Board Maintenance InstructionsTreadmill Error Messages Error MessagesTreadmill will not start Troubleshooting Guide4600T Treadmill Parts List Rev a Parts ListExploded View Console Assembly Keys Fitness PRODUCTS, LP Limited Warranty Warranty InformationCustomer Service