JVC CA-D501T, MX-D401T manual Standard Recording, To Record Any Sound Source To Tape

Page 25

REC

START/STOP

REC PAUSE

Note: At the start and end of cassette tapes, there is leader tape which cannot be recorded onto. Depend- ing on the recording source, the first part of the recording may be missing because of the leader. When recording CDs or radio broadcasts, to get the beginning of the recording on the tape, first wind on the leader before beginning recording.

CAUTION: If recordings you have made have excessive noise or static, the Unit may be too close to a TV which was on during the recording. Either turn off the TV or increase the distance between the TV and the System.

Standard Recording

This is the basic method for recording any source. The System also has special ways for recording CD to tape, and tape to tape, which save you time and effort, as well as give you some special effects. However, when you need to add a selection to a tape you have made, or are combining selections from several sources on one tape, use the method described below; just substitute the source you want into this procedure, such as a tape in Deck A, a CD, or the Tuner. You can also record from auxiliary source with this procedure.

To Record Any Sound Source To Tape ——————————

Follow these steps to record from any sound source onto a tape in Deck B.

Using the Unit

1.Insert a blank or erasable tape into Deck B.

2.Press the REVERSE MODE button if you want to record on both sides of the tape.

Press the button until the “

 

 

 

” or “

 

 

 

” indicator is lit.

•When using Reverse Mode, insert the tape so that it will be recorded in the forwards 3direction.

3.Check the recording direction for the tape.

Check that the Tape Direction indicator is the same as that for the tape in the tape deck. If the directions are different, press the 7 button after pressing the ÛTAPE Übutton to set the tape direction.

•When using Reverse Mode to record both sides of a tape, check that the Tape Direction indicator is in the forwards 3direction. If the direction indicator is not in the forwards 3direction, press the ÛTAPE Ü button then press the 7 button.

4.Prepare the source, by, for example, tuning in a radio station, loading CDs, or turning on connected equipment.

5.Press the REC START/STOP button.

The “REC” indicator light comes on and the System begins recording.

Using the Remote Control

1.Insert a blank or erasable tape into Deck B.

2.Press the REC PAUSE button.

The “REC” indicator blinks.

3.Press the REVERSE MODE button on the Unit if you want to record on both sides of the tape.

Press the button until the “

 

 

 

” or “

 

 

 

” indicator is lit.

 

 

 

 

 

•When using Reverse Mode, insert the tape so that it will be recorded in the forwards 3direction.

4.Prepare the source by, for example, tuning in a radio station, load- ing CDs, or turning on connected equipment.

5.Press the ª or £ button.

Recording starts in the direction of the button pressed.

•When using Reverse Mode to record both sides of a tape, press the £button.

Notes for using Reverse Mode for recording

When recording in Reverse Mode, the System automatically stops when it reaches the end of the reverse

2direction. To record on both sides of a tape, make sure that the recording direction for the tape inserted into Deck B is forwards 3, and that the Tape Direction indicator is also forwards 3, before you start recording.

English

21

Page 24 Page 26
Image 25
Page 24 Page 26
Contents CA-D501T/MX-D401T/MX-D301T If in Doubt Consult a Competent Electrician Class Laser Product CACA-D501T/-D701T Installation of the Unit FeaturesPower cord How This Manual Is OrganizedTable of Contents Set the Voltage Selector Switch AccessoriesHow To Put Batteries In the Remote Control Using the Remote ControlConnecting the AM Antenna Connecting the FM AntennaUsing the Supplied Wire Antenna Using an FM 75-Ohm Antenna Wire Not SuppliedConnecting the Speakers MX-D401T/ MX-D301T Connecting the Speakers CA-D501TOn the Remote Control Connecting Auxiliary EquipmentVCR or other equipment On the UnitCommon Operations Turning the Power On and OffDisplay Turning the System OnReinforcing the Bass Sound Adjusting the VolumeSound Modes Listening to Auxiliary Equipment Set the Volume control to Press the AUX buttonSetting the AM Tuner Interval Spacing Using the TunerOne Touch Radio ¢ P.UPPresetting Stations Tuning In a StationTo Change the FM Reception Mode Switching between Frequency BandsDisc display Using the CD PlayerCD Ü/8 To Insert Discs For Normal Play Play mode indicator is not litQuickest Way To Start a CD Is With the One Touch OperationLocating a Track With the Remote Control Directly Basics of Using the CD Player Normal PlayTo Play a Disc To Select a Disc, Track Or Passage Within a TrackProgramming the Playing Order of the Tracks Continuous PlayPress the Random button Random PlayPress the £/8 button Tray Lock Function Repeating a Selection or the DiscsLocking the Electronic Lock Unlocking the Electronic LockTape Direction Indicator on the Display Using the Cassette DeckRegular Play One Touch PlayMusic Scan Reverse ModeFast Left And Fast Right To Find the Beginning of the Current SelectionThings To Know Before You Start Recording RecordingTo Record Any Sound Source To Tape Standard RecordingCheck the recording direction for the tape CD Direct Recording How to Use the Dubbing ButtonTape to Tape Recording Dubbing Setting the Clock Using the TimerPress the Shift button Press the 1 Clock button Press the Select 5 + or 4 button to set the timeSetting the Timer To Change the Sleep Timer Setting Setting the Sleep TimerTo Cancel the Sleep Timer Setting Before Turning the Unit OffKaraoke Sing Along Using the MicrophoneSinging Along with Karaoke To Record Your Singing Digital EchoPlaying the Microphone Sound through the Speakers Microphone MixingTo Record Microphone Mixing Recording from the MicrophoneCompact Discs Cassette Tapes Care And MaintenanceMoisture Condensation Cassette DeckSymptom TroubleshootingPossible Cause ActionSpecifications Power Specifications AccessoriesSP-D311 Important for mains AC line
Related manuals
Manual 37 pages 57.01 Kb

CA-D501T, MX-D401T specifications

The JVC CA-D501T and JVC MX-D401T are both remarkable examples of compact audio systems that have made a significant impact on the personal entertainment landscape. While they each have unique features, they share a commitment to delivering high-quality sound and versatile functionality.

The JVC CA-D501T is designed with an emphasis on delivering robust audio performance without sacrificing style or compactness. This system features a high-powered output, enabling users to achieve rich and dynamic sound, whether they are listening to music, watching movies, or enjoying games. One of the standout features of the CA-D501T is its integrated CD player, which supports various disc formats, ensuring compatibility with a wide array of music collections.

Additionally, the system's dual cassette deck allows for both playback and recording, providing a nostalgic touch for users who still enjoy cassette tapes. The CA-D501T also includes an AM/FM radio tuner, giving users access to a variety of stations and the convenience of preset options, making it easy to switch between their favorite channels.

On the other hand, the JVC MX-D401T leans into modern technological conveniences without relinquishing the essence of traditional audio enjoyment. It boasts a sleek design that fits seamlessly into any living space while offering impressive sound capabilities. The MX-D401T features a digital amplifier that enhances sound clarity and reduces distortion, even at higher volumes.

Similar to the CA-D501T, the MX-D401T includes a CD player and FM/AM tuner, but it takes it a step further by incorporating Bluetooth connectivity. This feature allows users to stream music directly from their smartphones or tablets, making it an ideal choice for those who prioritize wireless convenience. The system also includes USB ports, allowing users to play back music stored on flash drives or other devices easily.

Both systems share several technological advancements like sound enhancement technologies that optimize audio performance, making them suitable for various listening preferences. They also offer equalizer settings, enabling users to tailor their sound experience according to their tastes.

Ultimately, whether one chooses the JVC CA-D501T or the MX-D401T, both systems provide a satisfying audio experience with their robust features, modern conveniences, and exceptional sound quality, proving to be excellent choices for both retro enthusiasts and tech-savvy users alike.
Top Page Image Contents