Trouble-Shooting, Top | Image IMTL99600 manual

TROUBLE-SHOOTING

Most treadmill problems can be solved by following the steps below. Find the symptom that applies, and follow the steps listed. If further assistance is needed, please call our Customer Service Department toll- free at 1-800-999-3756, Monday through Friday, 6 a.m. until 6 p.m. Mountain Time (excluding holidays).

PROBLEM: The power does not turn on

SOLUTION: a. Make sure that the power cord is plugged into a surge suppressor, and that the surge suppressor is plugged into a properly grounded outlet (see page 8). Use only a single-outlet surge suppressor that meets all of the specifications described on page 8. Important: The treadmill is not compatible with GFCI-equipped outlets.

b. After the power cord has been plugged in, make sure that the key is fully inserted into the console.

c. Check the circuit breaker located on the treadmill

near the power cord. If the switch protrudes as shown, the circuit breaker has tripped. To reset the circuit breaker, wait for five minutes and then press the switch back in.

d. Check the on/off switch located on the treadmill near the power cord. The switch must be in the on position.

PROBLEM: The power turns off during use

c
Tripped	Reset
d
On
Position

SOLUTION: a. Check the circuit breaker located on the treadmill frame near the power cord (see c. above). If the

circuit breaker has tripped, wait for five minutes and then press the switch back in.

b. Make sure that the power cord is plugged in.

c. Unplug the power cord, wait for five minutes, and then plug the power cord back in.

d. Remove the key from the console. Reinsert the key fully into the console.

e. Make sure that the on/off switch is in the on position.

f. If the treadmill still will not run, please call our Customer Service Department, toll-free.

PROBLEM: The displays of the console do not function properly

SOLUTION: a. Remove the key from the console and unplug the power cord. Carefully tip the treadmill down as shown in drawing a. Remove the Screws (39, 83) from the hood. Raise the Uprights (69) and carefully re- move the hood.

Locate the Reed Switch (10) and the Magnet (7) on the left side of the Pulley (8). Turn the Pulley until the Magnet is aligned with the Reed Switch. Make sure that the gap between the Magnet and the Reed Switch is about 1/8”. If necessary, loosen the 1/2” Screw (67) and move the Reed Switch slightly. Retighten the Screw. Re-attach the hood, and run the treadmill for a few minutes to check for a correct speed reading.

	a
		39
	69	83
	69
	1/8”	8
	67	8
	67
	10	7
	Top
	View

IMTL99600 specifications

The Image IMTL99600 is a cutting-edge device that stands out for its innovative features and robust performance, designed to cater to various imaging and technological needs. This device is characterized by its high-resolution capabilities, making it suitable for a diverse range of applications, including professional photography, advanced imaging systems, and multimedia projects.

One of the most notable features of the IMTL99600 is its impressive image resolution, which delivers breathtaking clarity and detail. With a pixel count that rivals some of the top-tier cameras on the market, users can expect sharp, vibrant images that retain quality even at larger scales. This makes it particularly appealing for graphic designers and content creators who require high-definition visuals for their work.

The technology underpinning the IMTL99600 includes an advanced sensor that enhances light absorption, resulting in superior low-light performance. This feature ensures that images taken in challenging lighting conditions maintain their quality, producing images with minimal noise and excellent color accuracy. Whether shooting in dimly lit environments or capturing fast-moving subjects, this device excels, offering versatility for various scenarios.

Additionally, the IMTL99600 integrates cutting-edge image processing algorithms that aid in optimizing photos in real-time. These algorithms enhance sharpness, contrast, and color profiles, allowing users to achieve their desired aesthetic without extensive post-processing. For professionals in photography and videography, this technology is essential for maintaining efficiency and precision.

Another remarkable characteristic is the device's user-friendly interface, designed to streamline the user's experience. With intuitive controls and customizable settings, users can easily adjust parameters to suit their preferences, fostering creativity while minimizing the learning curve for those new to advanced imaging technologies.

Moreover, the IMTL99600 is built with connectivity in mind, featuring compatibility with various devices and platforms, which allows for seamless integration into existing workflows. This feature enhances productivity, as users can easily transfer their images for further editing or sharing.

In summary, the Image IMTL99600 is a powerful imaging solution that combines high-resolution capabilities, advanced sensor technology, and a user-friendly interface. Its sophisticated features make it an ideal choice for professionals and enthusiasts alike, ensuring outstanding image quality across various applications.