Image IMTL49606.0 user manual Tighten the Upright Bolts yet

2. Have a second person orient the Base (48) as	2
shown.
Identify the Left Upright (31), which has a large
hole near the bend as shown.	Bend
Orient the Left Upright (31) as shown, and attach		31
it to the Base (48) with two Upright Bolts (27) and		39
two Upright Star Washers (39); do not tighten		27
the Upright Bolts yet.		48
	Large Hole
		39
		27
3. Orient the Right Upright (36) as shown, and at-	3
tach it to the Base (48) with two Upright Bolts
(27) and two Upright Star Washers (39); do not
tighten the Upright Bolts yet.
	Bend	48
		39
		36
		27
		39
4. Set the Base (48) near the front of the treadmill,	4	36
with the Power Cord (13) on the Hood (1) as
shown.
Cut the small tie (not shown) holding the Upright	13	36
		Strap
Wire (28) in a bundle.
Wrap the strap around the Upright Wire (28) and		28
secure the strap using the included plastic tie.		Tie
Then, pull the opposite end of the strap until the
end of the Upright Wire is pulled through the
Right Upright (36).
		28
		48
	7