Position the console bridge (5) near the top of the uprights. Attach the wire connectors leading from the left upright and the console bridge. Be sure the connectors are fully seated together. Feed any excess wire into the hollow inside the left upright.
Attach the console bridge to the uprights using six
M8 x 15mm Tapered Bolts (9), three for each upright. Leave the bolts
CAUTION: Do not pinch the wire when attaching the left upright to the console bridge.
9
93
Attach one handlebar extension (7) on each side of the console bridge, using two black M8 x 15mm (8) Bolts and two Star Washers (3) on each side.
11