NordicTrack NTTL09994 HOW to Fold and Move the Treadmill, HOW to Fold the Treadmill for Storage

Page 22

HOW TO FOLD AND MOVE THE TREADMILL

HOW TO FOLD THE TREADMILL FOR STORAGE

Before folding the treadmill, adjust the incline to the lowest position. If this is not done, the treadmill may be per- manently damaged. Remove the key and unplug the power cord. CAUTION: You must be able to safely lift 45 pounds (20 kg) in order to raise, lower, or move the treadmill.

1.Hold the treadmill with your hands in the locations shown at the right. CAUTION: To decrease the possibility of in- jury, bend your legs and keep your back straight. As you raise the treadmill, make sure to lift with your legs rather than your back. Raise the treadmill about halfway to the vertical position.

2.Move your right hand to the position shown and hold the treadmill firmly. Using your left hand, pull the latch knob to the left and hold it. Raise the treadmill until the latch pin is aligned with the hole in the catch. Insert the latch pin into the catch. Make sure that the latch pin is fully inserted into the catch.

To protect the floor or carpet from damage, place a mat under the treadmill. Keep the treadmill out of direct sunlight. Do not leave the treadmill in the stor- age position in temperatures above 85° Fahrenheit.

HOW TO MOVE THE TREADMILL

Before moving the treadmill, convert the treadmill to the stor- age position as described above. Make sure that the pin on the lock knob is inserted into the slot in the catch.

1.Hold the handrails as shown and place one foot against a wheel.

2.Tilt the treadmill back until it rolls freely on the front wheels. Carefully move the treadmill to the desired location. Never move the treadmill without tipping it back. To reduce the risk of injury, use extreme caution while moving the treadmill. Do not attempt to move the treadmill over an uneven surface.

3.Place one foot on the base, and carefully lower the tread- mill until it is resting in the storage position.

HOW TO LOWER THE TREADMILL FOR USE

1

2

Knob

Catch

Base

Front Wheels

1.Refer to drawing 2 above. Hold the upper end of the treadmill with your right hand as shown. Using your left hand, pull the lock knob to the left and hold it. Pivot the treadmill down until the frame is past the pin on the lock knob. Note: You may need to push the handrail to the side slightly.

2.Refer to drawing 1 above. Hold the treadmill firmly with both hands, and lower the treadmill to the floor.

22CAUTION: To decrease the possibility of injury, bend your legs and keep your back straight.

Image 22
Contents Model No. NTTL09994 Serial No QUESTIONS?Customer HOT Line Table of Contents Important Precautions Page Left Side Before YOU BeginRight Side Your own phillips screwdriver and wire cutters AssemblyExtension Legs 102 remain in the Uprights Do not tighten the Bolts yet HOW to Plug in the Power Cord Operation and AdjustmentPerformant Lubetm Walking Belt Features of the Console Getting Started HOW to USE the Manual Mode Select one of the three preset programs HOW to USE Preset ProgramsMeasure your heart rate, if desired When the program has ended, remove the key Follow your progress with the displaysSelect one of the custom programs HOW to Create Custom ProgramsRemove the key HOW to USE Custom Programs HOW to Connect Your Portable Stereo HOW to Connect Your Home Stereo HOW to Connect Your ComputerHOW to Connect Your VCR Whenkey. the program is completed, remove HOW to USE Programs Directly from OUR Internet Site Follow the on-line instructions to start the programOptional Hand Weights Information MODE/DEMO ModeOptional Chest Pulse Sensor HOW to Move the Treadmill HOW to Fold and Move the TreadmillHOW to Fold the Treadmill for Storage HOW to Lower the Treadmill for USEProblem The power turns off during use TROUBLE-SHOOTINGTop View Problem The walking belt slows when walked on Exercise Intensity Conditioning GuidelinesWorkout Guidelines R1200A Qty DescriptionOrdering Replacement Parts Exploded DRAWING-Model No. NTTL09994 Exploded Drawing Limited Warranty