PYLE Audio PLVWAN6 Wiring the Antenna, Installing the Antenna, Specification, Antenna Performance

Page 2

Wiring the Antenna

Prior to the final installation, temporarily connect the wires to make sure that all connections are made properly and to make sure that the system works properly.

Install the 4 antenna plugs into the TV tuner and the Cigarette light plug into the lighter outlet.

Note: The cigarette lighter plug may be removed and the red power wire may be connected to a 12 volt switched power source by using a 5 amp fuse (not provided) Check with a meter to be certain that the +12 volt power is switched or battery drain will occur. The black wire should have a #6 ring terminal crimped on (not supplied) and connected to chassis ground.

Installing the Antenna

Thoroughly clean the glass area with a clean cloth and glass cleaner.

Be certain temperature of the glass is above 68 degrees Fahrenheit.

Remove the protective tape and mount the booster section.

Remove the protective tape and mount the antenna wire sections.

Make certain that antennas are securely installed with antenna holders provided.

Stick the protective seal on the outside of the window to hide the sticky part of the booster amp.

Specification

TV ANTENNA

POWER : DC 12-14.4V

AUX TYPE : MINUS

MAX POWER AMP : 50mA

OUTPUT TERMINAL : 3.5 MINI PLUG *2(1PCS)

LENGTH OF THE ANTENNA CABLE : 16.54 INCHES

SIZE OF THE BOOSTER AMP SECTION : 2.56*2.13INCHES

WEIGHT : 470G(INCLUDING CABLE)(1PCS)

Caution while lnstalling the Antenna

Install the antenna onto the inside glass so it does not fall down while driving.

Install on a clean glass surface. Moistrue can cause the antenna to fall down.

Low temperature decreases the adhesion. Therefore, turn on the heater if temperature is below 68 degree Fahrenheit. Do not touch the sticky part of the tape.

Keep the distance between the side of window and antenna element to a minimum of 1 inch. Touching the windows can affect the teansmission.

Do not run the antenna cables next to power or speaker leads or noise problems can occur.

Antenna Performance

A car with a rear defroster or heating refract film can deflect the signal which causes poor reception.Please check the type of glass and film before installing the product.

Install this product on the inside of the car. Therefore, in some cases,image of television can be affected.

Weak signals can be the cause of poor image or sound.

Heater, fan and other functions of the car can affect the TV reception.

Tunnels or building can deflect the signals.

16.54in.

2.56in.

2.13in.

(Fig 3)

ACCESSORY

POWER CORD HOLDER : 6

ANTENNA HOLDER : 4

BODY COVER : 2

INSTRUCTION BOOK :1

Note : Parts or design are subject to change without notice.

Image 2
Contents Parts Supplicd TV Antenna2 Power Cord Holder6 Antenna Cable Holder4 Seal2LV WA N Proper LocationSpecification Wiring the AntennaInstalling the Antenna Antenna Performance

PLVWAN6 specifications

PYLE Audio PLVWAN6 is a versatile and innovative product designed to enhance your audio experience, whether at home, in the office, or on the go. This unit is known for its exceptional sound quality and user-friendly features, making it a great choice for audiophiles and casual listeners alike.

One of the standout features of the PYLE Audio PLVWAN6 is its powerful 6.5-inch woofer, which delivers deep bass and crisp highs to create an immersive listening experience. This woofer is engineered to produce rich and full sound across various music genres, from classical to hip-hop. The built-in amplifier further enhances audio performance, ensuring that even at higher volumes, the sound remains clear and undistorted.

The PLVWAN6 boasts a range of connectivity options that cater to modern audio needs. With Bluetooth technology, users can easily connect their smartphones, tablets, or laptops without the hassle of wires. This wireless capability allows for seamless streaming of music from various platforms, providing convenience and freedom of movement.

In addition to Bluetooth, the PYLE Audio PLVWAN6 includes multiple input options, such as USB and auxiliary ports. This feature enables users to connect a wide range of devices, including flash drives and other audio sources, extending its versatility. The unit also comes equipped with an FM radio tuner, allowing users to enjoy their favorite radio stations whenever they desire.

A unique characteristic of the PYLE Audio PLVWAN6 is its rugged and portable design. Built with high-quality materials, it is designed to withstand the rigors of outdoor use. The lightweight construction and built-in handle make it easy to transport, making it an ideal choice for picnics, beach outings, and tailgating events.

The PLVWAN6 is also user-friendly, featuring intuitive controls that allow easy adjustment of volume, bass, and treble settings. This adaptability ensures that users can tailor their listening experience to their preferences, enhancing overall satisfaction.

In conclusion, the PYLE Audio PLVWAN6 is a powerful audio solution that combines sound quality, versatility, and portability. With features such as Bluetooth connectivity, multiple input options, and a lightweight design, it is perfect for anyone seeking to elevate their audio experience while enjoying the freedom of movement. Whether at home or on the go, the PLVWAN6 is a worthy addition to any audio enthusiast's collection.