JVC HR-J435EK SET A/B Code Switch, RE-SUPPLY Power, Remote A/B Code Switching, Ntsc Playback

Page 18

18

PLAYBACK(cont.)

Remote A/B Code Switching

A/B CODE	2
1	2	3
4	5	6
7	8	9
	0

PLAY

6

q

PLAY

OPERATE

The remote control is capable of controlling two JVC video recorders independently; one set to respond to the remote control’s A code control signals and another set to respond to B code control signals. The remote control is preset to send A code signals because your video recorder is initially set to respond to A code signals. You can easily modify your video recorder to respond to B code signals.

1		REMOVE POWER SUPPLY
1		Unplug the mains power cord from the mains outlet.
2		SET A/B CODE SWITCH
2		Set to B.
3		RE-SUPPLY POWER
3		Plug the mains power cord back into the mains outlet.
4		TURN THE RECORDER ON
		Press OPERATE on the remote control. The recorder
		will now only respond to B code signals.

NOTE:

Some TV sets may malfunction in response to the B mode. If this happens, switch back to the A mode.

3

1

NTSC Playback

Your video recorder is equipped with NTSC circuitry that can play back NTSC tapes.

1		LOAD A CASSETTE
1		Insert a cassette recorded in NTSC.
2		START PLAYBACK
		Press PLAY. “NT” appears on the display panel.

		● Some TVs shrink the picture vertically and place
		black bars at the top and bottom of the screen. This is
		not a malfunction on the part of either the video
		recorder or the TV.
		● The picture may roll up and down. This can be
		corrected using the V-HOLD control found on some
		TVs. (This cannot be corrected if the TV does not
		have a V-HOLD control.)
		● The counter and tape remaining time readings will be
		incorrect.
		● During search, still, or frame-by-frame playback, the
		picture will be distorted, and there may be a loss of
		colour.
		● Depending on the type of TV, the top and bottom
		portions of superimposed displays may be cut off
		during NTSC playback.

Image 18

Contents HR-J435EK Safety Precautions Safety FirstDo not place the recorder Step Quick SET UP Basic Connections Check ContentsInstalling Your NEW Reco Rder Situate RecorderReset Output Mode Select Output ModeSET TV Preset Tune The TV To Your Video RecorderConnection To simple connection to a satellite receiver Installin G Your NEW Recorder contdSatellite Receiver Outdoor UnitPin Scart connectors Aerial terminalNitial Sett Ings Tuner SetTurn on the Recorder JOGSET Clock Automatically Clock SetTurn the Recorder on PreparationReturn to Normal Screen PresetInitial Settings SET Date and TimePoint Basic PlaybackLoad a Cassette Start PlaybackActivate FRAME-BY Frame Playback Playback FeaturesPause During Playback Still Picture/Frame-By- Frame PlaybackVariable-Speed Search Activate VARIABLE-SPEED SearchActivate HIGH-SPEED Search High-Speed Turbo SearchReturn to Automatic Tracking Adjust Tracking ManuallyOverride Automatic Tracking Activate Instant ReviewPlayback Tape Position IndicatorActivate Repeat Repeat PlaybackIndex Search Activate Index SearchDisplay Remaining Time Tape Remaining TimeSET Counter Memory Activate Scene FinderStop Scene Finder Activate CounterRemote A/B Code Switching SET A/B Code SwitchRE-SUPPLY Power Ntsc PlaybackBasic Recording Screen Access Mode SelectS.T. Picture System RecordingPlayback On-Screen Displays ENABLE/DISABLEDefault setting is ON, so if you want on-screen Not, press Push JOG%Þ to place it thereRecording Features Timer Recording Make List of Stored Station Names Preset PositionsAccess CH. SET Mode Menu Screen Information On Video Plus+Enter Preset Position NumberClose Menu Access Timer PROGRAM- Ming Screen Video Plus+ Timer RecordingTimer RECORDINGcont Enter Pluscode NumberEngage RECORDER’S Timer Mode To re-engage the timer, press Timer To Delay The Stop TimeTo Timer-Record Weekly Or Daily Serials Regular Timer Programming TimeAccess Programme Screen Check And Cancel ProgrammesPDC Recording Timer Warning TimerAuto SP/LP Timer Auto SP/LP TimerMake Connections SET Recording DECK’S Input ModeEdit To Or From Another Video Recorder Start Source PlayerStart Camcorder SET RECORDER’S Input ModeEdit From a Camcorder Start RecorderMulti-Brand Remote Con- trol Remote ControlControl Your TV Using Addi- tional Buttons SET TV Brand CodeMenu Access CH. SET ModeSelect Mode Select PositionClose Confirmation Select ItemDelete Channel Select NEW PositionSelect NEW Station Switch StationsUsing the Confirmation Screen Select Station Name CharacterAccess Manual CH. SET Perform TuningFine-Tuning Channels Already Stored Select Channel toTV Station and ID List TV Station Channel NU Mber Guid E Bluebell HillChannel Islands Corrective Action ClearTimer again Possible CauseQuestions and Answers Index List Of TermsFront View ANT. in Connector enables connection of aerial. pg Indicator will blink during turbo searchRemote Control Installing Batteries How To UseDimensions WxHxD Pin scart connector x 2 IN/OUT x 1, in xProvided accessories