Using the Remote Control
1 | 2 | 1.Power on/off control selector | |
|
| ||
|
| 2.HDMI audio switch selector | |
|
| 3.Tuner band control selector | |
3 |
| 4.Tuner memory selector | |
| 5.Channel source output selector | ||
|
| ||
4 | 13 | 6.Treble volume increase selector | |
| 7.Left balance selector | ||
|
| ||
|
| 8.Treble volume decrease selector | |
| 14 | 9.USB/SD play selector | |
| |||
|
| ||
5 | 15 | 11.Side left volume adjustment selector | |
6 | 16 | 12.Center volume adjustment selector | |
13.Tuner number selector | |||
| 17 | ||
| 14.Input mode selector | ||
7 | 18 | ||
| 19 | 15.DSP control selector(live, hall, church) | |
8 | 20 | 16.Bass volume increase selector | |
9 | 21 | 17."Mute mode" control selector | |
10 | 18.Master volume control selector | ||
| |||
11 | 22 | 19.Right balance selector | |
12 | 23 | 20.Bass volume decrease selector |
21.USB/SD pause selector
22.Side right volume adjustment selector 23.Subwoofer volume adjustment selector
Battery Installation
1.On the back of the remote control, push the tab and lift off the battery cover.
2.Obtain two (2)
3.Align the cover keys with the case holes and press the cover back into place. The tab should click when the cover is locked.
4.Test the unit by pressing POWER or any mode key. If the batteries are inserted correctly, the selected mode key will blink once.
Note
Do not leave the remote control in an extremely hot or humid place. Do not use a new battery with old ones.
Do not mix manganese batteries with other kinds of batteries.
Do not expose the remote sensor to direct sunlight or lighting apparatuses. Doing so may cause a malfunction. If you do not intend to use the remote control for an extended period of time, remove the batteries to avoid possible damage from battery leakage and corrosion.
.3.