NordicTrack NCTL09992 user manual Unplug the Power Cord

Page 24

PROBLEM: The walking belt slows when walked on

SOLUTION: a. Use only a CUL-listed surge protector, rated at 15 amps, with a 1.5 mm2 (14-gauge) cord of 1.5 m (5 ft.) or less in length.

b. If the walking belt is overtightened, treadmill perfor-

 

mance may decrease and the walking belt may be-

 

come damaged. Remove the key and

UNPLUG THE

POWER CORD

. Using the allen wrench, turn both rear

roller adjustment bolts counterclockwise, 1/4 of a turn. When the walking belt is properly tightened, you

should be able to lift each side of the walking belt 7 to

10 cm (3 to 5 in.) off the walking platform. Be careful to keep the walking belt centered. Plug in the power cord, insert the key and run the treadmill for a few minutes.

Repeat until the walking belt is properly tightened.

b

7–10 cm

Rear Roller Adjustment Bolts

c. If the walking belt still slows, please call our Customer Service Department.

PROBLEM: The walking belt is off-centre

SOLUTION:

a.

If the walking belt has shifted to the left,

first remove

 

 

the key and

UNPLUG THE POWER CORD

. Using the

 

 

allen wrench, turn the left rear roller bolt clockwise, and the

 

 

 

right bolt counterclockwise, 1/4 of a turn each. Be careful

 

 

 

not to overtighten the walking belt. Plug in the power cord,

 

 

 

insert the key and run the treadmill for a few minutes.

 

 

 

Repeat until the walking belt is centered.

 

 

b.

If the walking belt has shifted to the right,

first remove

 

 

the key and

UNPLUG THE POWER CORD

. Using the

 

 

allen wrench, turn the left rear roller bolt counterclock-

 

 

 

wise, and the right bolt clockwise, 1/4 of a turn each. Be

 

 

 

careful not to overtighten the walking belt. Plug in the

 

 

 

power cord, insert the key and run the treadmill for a few

 

 

 

minutes. Repeat until the walking belt is centered.

 

PROBLEM: The walking belt slips when walked on

a

b

SOLUTION:

a. If the walking belt slips when walked on, first remove the

 

 

key and

UNPLUG THE POWER CORD

. Using the allen

wrench, turn both rear roller adjustment bolts clockwise, 1/4 of a turn. When the walking belt is correctly tightened, you should be able to lift each side of the walking belt 7 to 10 cm (3 to 5 in.) off the walking platform. Be careful to keep the walking belt centered. Plug in the power cord, in- sert the key and carefully walk on the treadmill for a few minutes. Repeat until the walking belt is properly tightened.

a

PROBLEM: The incline of the treadmill does not change correctly or does not change when iFIT.com

CD’s and videos are played

SOLUTION:

a. With the key in the console, press one of the Incline buttons.

Whilst the incline is changing, re-

 

move the key.

After a few seconds, re-insert the key. The treadmill will automatically rise to the

 

maximum incline level and then return to the minimum level. This will recalibrate the incline.

 

24

Page 23 Page 25
Image 24
Page 23 Page 25
Contents Model No. NCTL09992 Serial No Serial Number DecalTo operate this product, call Table of Contents Limited WarrantyImportant Precautions From your CD player or VCR when you are not using them Using the treadmill Before YOU BeginLeft Side Right SideAssembly Assembly requires two peopleExtension Legs 102 remain in the Uprights Thread the Bolts into the Handrail Bolts yetOperation and Adjustment Features of the Console VideoPlug in the power cord Enter your weightWater bottle holder Insert the key fully into the consoleHOW to USE the Manual Mode HOW to USE Preset Programs When the program has ended, remove the key Displays and indicators on the console remainStorage position Indicator is Press the Record button and programRemove the key HOW to USE Custom Programs GramFollow your progress with the displays HOW to Connect Your Portable CD Player HOW to Connect Your Portable StereoHOW to Connect Your Home Stereo Wire removed from Line OUT jackHeadphones/Speakers Audio 5mm Cable AdaptorHOW to Connect Your VCR ProgramsNext settings of the CD or video program When the program is completed, remove KeyStart button or the Speed ConsoleHOW to USE Programs Directly from OUR Internet Site Information MODE/DEMO Mode Optional Hand WeightsOptional Chest Pulse Sensor HOW to Fold and Move the Treadmill HOW to Fold the Treadmill for StorageHOW to Move the Treadmill HOW to Lower the Treadmill for USETROUBLE-SHOOTING SolutionPower Cord Unplug the Power CordConditioning Guidelines Exercise IntensityWorkout Guidelines Exercise FrequencyQty Description Key No. Qty Lift FrameOptional Chest Pulse 105 Shock Thick Base Pad 106 Extension Leg Assembly Catch Screw/Extension Leg Screw Green Wire, F/RingKey No. Qty Description Ordering Replacement Parts EXP1000 treadmillR0102A Exploded DRAWING-Model No. NCTL09992
Top Page Image Contents