Life Fitness 8972901 REV B-3 owner manual UsING and TesTING THe sAfeTy sTOp pUll COrD

Page 23

TrACkING (CeNTerING) AN exIsTING Or NeW sTrIDING belT

1.Locate the two access holes to the BELT TENSIONING BOLTS (D) on each of the rear roller guards.

2.Stand on the sides of the treadmill and straddle the belt. Enter the MANUAL Workout and set the belt speed to run at 4.0 mph (6.4 kph).

3.If the striding belt has moved to the right, turn the right tension bolt 1/4 turn clockwise with the provided 6MM Hex Key Wrench, and then turn the left tension bolt 1/4 turn counter-clockwise to start striding belt tracking back to center of roller.

4.If the striding belt has moved to the left, turn the left tension bolt 1/4 turn clockwise and then turn the right tension bolt 1/4 turn counter-clockwise to start striding belt tracking back to center of roller. Repeat adjustments until the striding belt appears centered. Allow the machine to continue running for several minutes to observe if tracking remains stabilized.

D

D

Note: Do not exceed one full turn of the adjusting screws in either direction. If after one full turn the belt does not track properly, contact Customer Support Services.

TeNsIONING AN exIsTING sTrIDING belT

Under normal usage, the treadmill striding belt may stretch slightly. If the belt starts to slip during use, take the steps listed below to correct the tension.

1.Using the STOP key, stop the treadmill.

2.Turn the belt tensioning bolts clockwise a quarter-turn per side to tension the belt. Do not exceed one full turn (four quarter-turns per side).

3.Set the treadmill at 2.0-mph (3.2 kph) and get on to make sure the belt no longer slips. Also, check the striding belt’s tracking. If the striding belt drifts to the left or right see Tracking (Centering) an Existing or New Striding Belt.

Note: Do not overtighten the tensioning bolts while making belt adjustments. Overtightening of bolts may over stretch and damage the striding belt or roller bearings. Do not exceed one full turn of either bolt in either direction.

6.4UsING AND TesTING THe sAfeTy sTOp pUll COrD

During operation of the treadmill, the lanyard on the Safety Stop Pull Cord should be attached to an item of the user’s clothing.

While the treadmill is on and the console display is active, remove the Safety Stop Pull Cord from the treadmill. A mes- sage shall be displayed on the console similar to “EMERGENCY STOP - REPLACE KEY”. With the Safety Stop Pull Cord removed no keys shall function on the treadmill.

Place the Safety Stop Pull Cord back in place. The treadmill will reset and will be ready for operation.

6.5HOW TO ObTAIN prODUCT serVICe

1.Please contact your dealer or Life Fitness Customer Service at 1-800-351-3737.

2.Verify the symptom and review the operating instructions and troubleshooting matrix.

3.Locate and document the serial number of the treadmill. The treadmill’s serial number is located on the front of the treadmill near the power switch. Please also have proof of purchase information available.

21

Image 23
Contents T3 Treadmill Page InternatIonal offICes Corporate HeadquartersPage TAble Of CONTeNTs Page ImpOrTANT sAfeTy INsTrUCTIONs Page T3 with Track Console LIfe fITNess T3 TreADmIll DesIGN IllUsTrATIONUNpACkING AssemblyCOmpONeNT lIsT & HArDWAre Tools Needed for AssemblyINsTAllING UprIGHTs and HANDlebArs A EC E a D F INsTAllING THe CONsOleCAlIbrATION Attaching THe pOWer COrDSupply Voltage VAC Frequency Hz Maximum Current Amps SeTUpPOWer sWITCH ACTIVITy zONe and HeArT rATe seNsOr OVerVIeW E GHand pUlse seNsOr sysTem TrOUblesHOOTING SerVICe and TeCHNICAl DataProblem Lubricating the Walking belt PreVeNTIVe mAINTeNANCe TIpsMonthly YearlyHOW to ADjUsT and TeNsION THe sTrIDING belT HOW to ObTAIN prODUCT serVICe UsING and TesTING THe sAfeTy sTOp pUll COrDShipping Dimensions SpeCIfICATIONsPhysical Dimensions WArrANTy INfOrmATION EffeCT Of U.s. sTATe lAWs HOW to GeT pArTs & serVICeExClUsIVe WArrANTy CHANGes in WArrANTy not AUTHOrIzeD
Related manuals
Manual 25 pages 18.12 Kb

8972901 REV B-3, 8972901 specifications

The Life Fitness 8972901, also known as the 8972901 REV B-3, represents a state-of-the-art exercise equipment model designed to meet the demands of fitness enthusiasts and commercial gyms alike. It is a part of Life Fitness's commitment to promoting health and wellness through innovative design and engineered solutions.

One of the main features of the Life Fitness 8972901 is its advanced console technology. The console is equipped with an intuitive touch screen interface, allowing users to easily navigate through various workout programs and settings. The display can show multiple metrics, such as time, distance, speed, calories burned, and heart rate, providing comprehensive data to help users track their fitness progress effectively.

Another significant characteristic of the Life Fitness 8972901 is its robust construction. Built with high-quality materials, it ensures durability and stability during intense workouts. The frame is designed to withstand heavy usage, making it suitable for both home and commercial fitness environments. Additionally, the equipment features a compact design, which allows it to fit in smaller spaces while still delivering a powerful workout experience.

The Life Fitness 8972901 incorporates several key technologies aimed at enhancing user experience and performance. For instance, it features a variety of customizable workout programs that cater to different fitness levels and preferences. These programs can range from high-intensity interval training (HIIT) to endurance workouts, ensuring that users have a diverse selection of routines to choose from.

Moreover, the incorporation of wireless heart rate monitoring further sets the Life Fitness 8972901 apart. It supports Bluetooth connectivity, enabling users to sync their workout data with fitness apps and wearables. This feature not only simplifies data tracking but also allows users to analyze their performance over time, helping them to adjust their training regimens accordingly.

Ergonomically designed components, such as adjustable seat heights and handlebars, ensure that the Life Fitness 8972901 can accommodate a wide range of body types and preferences. This focus on user comfort enhances the overall workout experience, allowing individuals to push themselves without compromising safety or comfort.

In summary, the Life Fitness 8972901, REV B-3, stands out as a premium piece of fitness equipment. With its innovative technologies, robust construction, and user-centric design, it meets the expectations of those seeking to elevate their fitness journey, whether at home or in a gym setting.