Healthrider HMTL57808 manual

Page 10

8.Identify the Right Handrail (90), which has a large hole in the location shown. Hold the Right Handrail near the Console (87).

Insert the tie on the console wire into the large hole in the Right Handrail (90) and out of the top as shown; use needlenose pliers if necessary. Next, insert the included plastic tie through the Right Handrail as shown. Make sure that the plastic tie holds the console wire against the inner side. Then, tighten the plastic tie.

Attach the Right Handrail (90) with two M4.2 x 19mm Screws (1). Make sure that no wires are pinched. Start both Screws before tightening either of them; do not overtighten the Screws. Then, remove the plastic tie.

Attach the Left Handrail (not shown) to the Console (87) in the same way. Note: There are no wires on the left side of the Console.

9.Hold the Pulse Support (109) near the Console (87). Connect the Console Ground Wire (40) on the Pulse Support to the ground wire on the Console. Then, insert the ground wires into the Console and set the Pulse Support on the Console. Make sure that no wires are pinched.

Tighten two M4 x 20mm Screws (3) with two M4.2 Star Washers (70) into the Pulse Support (109).

Tighten the six M4.2 x 19mm Screws (1) from step 7 into the Pulse Support (109) and the Console (87). Start all six Screws before tight- ening any of them.

8

 

 

Tie

 

Console

 

 

 

 

 

 

 

 

Wire

 

90Plastic Tie

 

1 Large Hole

 

 

 

 

 

1

 

 

87

 

 

 

9

 

 

 

 

70

 

 

 

 

 

 

 

 

1

1

3

 

 

1

87

 

70

3

109

 

1

 

 

 

 

 

40

 

 

 

 

 

Ground

 

 

 

 

 

Wire

10

Page 9 Page 11
Image 10
Page 9 Page 11
Contents QUESTIONS? Model No. HMTL57808 Version No Serial NoTable of Contents Important Precautions Various factors, including the users moveCord immediately after use, before cleaning Before YOU Begin Assembly Page Page Tighten the Nut the Wheel must turn freely Not fully fold the Frame yetFully tighten the Bolts yet Page That no wires are pinched Again. if the Connectors are not CONTighten all four Bolts Make sure that no wires are pinched HOW to Plug in the Power Cord Operation and AdjustmentPRE-LUBRICATED Walking Belt Console Diagram Features of the ConsoleHOW to Turn on the Power Select the user modeSelect a default user setting Set the date and timeSelect the manual mode HOW to Identify Yourself AS User 1 or UserStart the walking belt Measure your heart rate if desired When you are finished exercising, removeAdjust the incline of the treadmill to the lowest Optional chest pulse sensor at the sameSelect a personal trainer workout View exercise information by week View exercise information by yearView exercise information by month View exercise information by dayReset the fitness journal HOW to Reset the Fitness Journal 1. Select the user modeExit the user mode Information Mode Optional Chest Pulse SensorHOW to Fold and Move the Treadmill HOW to Move the TreadmillHOW to Lower the Treadmill for USE Problem The power turns off during use TroubleshootingCompatible with GFCI-equipped outlets Problem The walking belt slows when walked on Page Workout Guidelines Exercise GuidelinesExercise Intensity Exercise FrequencySuggested Stretches Part LIST-Model No. HMTL57808.0 Key No. Qty DescriptionKey No. Qty Description Exploded Drawing A-Model No. HMTL57808.0 R1108A 102 108 Exploded Drawing C-Model No. HMTL57808.0 Exploded Drawing D-Model No. HMTL57808.0 R1108A Ordering Replacement Parts

HMTL57808 specifications

The Healthrider HMTL57808 is a state-of-the-art treadmill designed to meet the needs of fitness enthusiasts at all levels. And if you're looking for a machine that combines performance, comfort, and innovative technology, the HMTL57808 stands out as a premier choice among home fitness equipment. This treadmill is especially known for its robust construction and user-centric features.

One of the hallmark characteristics of the HMTL57808 is its powerful 2.5 HP motor, which ensures smooth and quiet operation, accommodating various workout intensities. This treadmill can reach speeds of up to 10 miles per hour, allowing users to switch easily between a gentle walk and an intense run. The motor also offers durability and long-lasting performance, making it an excellent investment for home fitness.

The HMTL57808 is equipped with a spacious running surface, measuring 20 inches in width and 55 inches in length. This provides adequate room for users to move comfortably, whether they are walking or running. Additionally, the shock absorption technology minimizes impact on joints, offering a safer running experience.

In terms of features, the Healthrider HMTL57808 boasts an easy-to-read LCD display that provides essential workout statistics, including time, distance, speed, and calories burned. This real-time feedback empowers users to track their progress and stay motivated. Furthermore, the treadmill comes with multiple built-in workout programs designed to accommodate various fitness levels and goals.

The treadmill’s unique folding design allows for space-saving storage, making it ideal for home environments where space may be a concern. Users can conveniently fold the treadmill after use, ensuring it occupies minimal footprint.

Another aspect of the HMTL57808 is its compatibility with Bluetooth technology, enabling users to connect their devices and access fitness apps for a more tailored experience. This integration allows access to a wide range of workouts and virtual coaching, enhancing motivation and engagement.

Lastly, the Healthrider HMTL57808 includes heart rate monitoring sensors, helping users maintain their target heart rate for optimal exercise efficiency. Through its impressive combination of features, technology, and user-friendly design, the Healthrider HMTL57808 is an excellent treadmill for anyone serious about enhancing their fitness routine in the comfort of their own home.
Top Page Image Contents