Healthrider HRTL14912 HOW to Fold and Move the Treadmill, HOW to Fold the Treadmill for Storage

Page 23

HOW TO FOLD AND MOVE THE TREADMILL

HOW TO FOLD THE TREADMILL FOR STORAGE

Before folding the treadmill, adjust the incline to the lowest position. If this is not done, the treadmill may be permanently damaged. Next, unplug the power cord. CAUTION: You must be able to safely lift 45 pounds (20 kg) to raise, lower, or move the treadmill.

1.Hold the treadmill in the locations shown at the right. To decrease the possibility of injury, bend your legs and keep your back straight. As you raise the treadmill, make sure to lift with your legs rather than your back. Raise the treadmill about halfway to the vertical position.

2.Move your right hand to the position shown and hold the treadmill firmly. Using your left hand, pull the lock knob to the left and hold it. Raise the treadmill until all parts of the treadmill are past the latch pin. Then, release the lock knob. Make sure that the lock knob is fully released so that the latch pin is securely holding the catch.

To protect the floor or carpet from damage, place a mat under the treadmill. Keep the treadmill out of direct sunlight. Do not leave the treadmill in the stor- age position in temperatures above 85° Fahrenheit.

HOW TO MOVE THE TREADMILL

Before moving the treadmill, convert the treadmill to the storage position as described above. Make sure that the latch pin is securely holding the catch.

1.Hold the handrails and place one foot on the base.

2.Tilt the treadmill back until it rolls freely on the wheels. Carefully move the treadmill to the desired location. To re- duce the risk of injury, use extreme caution while moving the treadmill. Do not attempt to move the treadmill over an uneven surface.

3.Place one foot on the wheel, and carefully lower the treadmill until the base is resting in the storage position.

1

2

Latch

Pin

Lock

Knob

Catch

Base

Front Wheels

23

Image 23
Contents Customer HOT Line QUESTIONS?Model No. HRTL14912 Serial No Table of Contents Important Precautions Page Right Side Before YOU BeginBack Assembly Performant Lubetm Walking Belt HOW to Plug in the Power CordTreadmill Operation Features of the Console Description of the Console HOW to Turn on the Power HOW to USE the Manual ModeDistance/Incline Time/Segment TimePulse/Calories Select one of the six preset programs HOW to USE the Preset ProgramsHOW to USE the Pulse Programs Enter a maximum heart rate setting Select one of the two custom programs HOW to Create Custom ProgramsHOW to USE Custom Programs HOW to Connect Your Portable Stereo HOW to Connect Your Computer HOW to Connect Your Home StereoPressVCR. the Play button on your CD player or HOW to Connect Your VCRAudio Adapter Cable Whenkey. the program is completed, remove Follow the on-line instructions to start the program HOW to USE Programs Directly from OUR WEB SiteOptional Chest Pulse Sensor Information MODE/DEMO ModeHOW to Move the Treadmill HOW to Fold and Move the TreadmillHOW to Fold the Treadmill for Storage HOW to Lower the Treadmill for USE Power turns off during use Troubleshooting and MaintenanceProblemsolution Power does not turn onTop Walking belt is off-center or slips when walked onDisplays Page Exercise Frequency Exercise GuidelinesExercise Intensity Workout GuidelinesSuggested Stretches Key Qty Description R0402AHOW to Order Replacement Parts Limited Warranty Drawing Exploded DRAWING-Model No. HRTL14912