Healthrider HRTL12910 manual Whenkey. the program is completed, remove

Page 18

If the speed or incline settings are too high or too low, you can manually override the settings at any time by pressing the Speed or Incline buttons on the console. However, when the next “chirp” is heard, the speed and/or incline will change to the next settings of the CD or video program.

To stop the walking belt at any time, press the Stop button on the console. The Time/Segment Time display will begin to flash. To restart the pro- gram, press the Start button or the Speed + but- ton. After a moment, the walking belt will begin to move at 1.0 mph. When the next “chirp” is heard, the speed and incline will change to the next settings of the CD or video program. The program can also be stopped by pressing the Stop button on your CD player or VCR.

When the CD or video program is completed, the walking belt will stop and the Time/Segment Time display will begin to flash. Note: To use another CD or video program, press the Stop button or re- move the key and go to step 1 on page 17.

Note: If the speed or incline of the treadmill does not change when a “chirp” is heard:

Make sure that the iFIT.com indicator is lit and that the Time/Segment Time display is not flashing. If the Time/Segment Time display is flashing, press the Start button or the Speed + button on the console.

Adjust the volume of your CD player or VCR. If the volume is too high or too low, the con- sole may not detect the program signals.

Make sure that the audio cable is properly connected, that it is fully plugged in, and that it is not wrapped around a power cord.

If you are using your portable CD player and the CD skips, set the CD player on the floor or another flat surface instead of on the console.

5 Follow your progress with the four displays.

See step 5 on page 11.

6 Whenkey. the program is completed, remove the

See step 6 on page 13.

CAUTION: Always remove iFIT.com CDs and videos from your CD player or VCR when you are not using them.

18

Image 18
Contents QUESTIONS? Model No. HRTL12910 Serial NoCustomer HOT Line Table of Contents Important Precautions Page Before YOU Begin BackRight Side Assembly HOW to Plug in the Power Cord Treadmill OperationPerformant Lubetm Walking Belt Features of the Console Description of the Console HOW to USE the Manual Mode HOW to Turn on the PowerTime/Segment Time Pulse/CaloriesDistance/Incline HOW to USE the Preset Programs Select one of the four preset programsHOW to USE the Pulse Programs Enter a maximum heart rate setting HOW to Connect Your Portable Stereo HOW to Connect Your Home Stereo HOW to Connect Your ComputerHOW to Connect Your VCR Audio Adapter CablePressVCR. the Play button on your CD player or Whenkey. the program is completed, remove HOW to USE Programs Directly from OUR WEB Site Follow the on-line instructions to start the programInformation MODE/DEMO Mode Optional Chest Pulse SensorHOW to Fold and Move the Treadmill HOW to Fold the Treadmill for StorageHOW to Move the Treadmill HOW to Lower the Treadmill for USE Power does not turn on Troubleshooting and MaintenanceProblemsolution Power turns off during useWalking belt is off-center or slips when walked on DisplaysTop Workout Guidelines Exercise GuidelinesExercise Intensity Exercise FrequencyR0202A Key Qty DescriptionHOW to Order Replacement Parts Exploded DRAWING-Model No. HRTL12910 Exploded DRAWING-Model No. HRTL12910 Limited Warranty