During game play, you can escape from the current puzzle and select another puzzle to play. You can choose any puzzles ranging from the 1st to your highest achieved one. (You cannot select a puzzle higher than your LAST SOLVED PUZZLE)
For selecting the first 9 puzzles, press PUZZLE, then the desired puzzle number (on FACE 1) to start the game. For the next 9 puzzles, you can input the number by pressing a button on FACE 2.
This follows for all puzzles through #54. For example,
For puzzle #17, press the
If the selected puzzle number is bigger than the most updated puzzle number, then it is an invalid input and you will hear a "beep" sound. You then should input a puzzle number again. If the input is valid, the game starts again.
You can restart the game by pressing the ON/OFF/RESET button for over 2 seconds and then pressing the number button of the puzzle.
To change the mode in the middle of a game, the easiest way is to turn off the unit, then turn it back on and press the GAME button to select game. Or if in mode 1 or 2, holding the ON/OFF/RESET button over 2 seconds causes the unit to go back to the puzzle selection mode. Holding the ON/OFF/RESET button over 2 seconds again causes the unit to go back to the beginning. Then you can select your game mode again.
REMEMBER
The challenge of The Lights Out Cube is to solve a puzzle in the minimum number of moves required. When you solve a puzzle in the minimum number of moves, you will be rewarded with a blinking light show chasing around the entire display. The Lights Out Cube will then automatically display the next puzzle! If you go over the minimum number of moves, the number of moves you exceed by will flash on your display, but you can still proceed to the next puzzle as long as you do not exceed 10 moves!
For example, solving a 4 step puzzle in 6 steps will display two blinking lights! If you solve a puzzle in more than 10 steps over the minimum number of moves, a lighted "X" will appear on screen and you will have to try again before
10