JVC UX-P5/UX-P3 manual Connecting Other Equipment, To connect audio equipment

Page 13

Continued

English

To remove the speaker grilles (ONLY FOR UX-P5)

The speaker grilles are removed as the illustrations below.

HolesProjections

Speaker grille

Connecting Other Equipment

For UX-P5:	You can connect both of the analog and
	digital equipment.
For UX-P3:	You can connect audio equipment — used
	only as a playback device.

• DO NOT connect any equipment while the power is on.

•DO NOT plug in any equipment until all connections are complete.

To connect audio equipment

Be sure that the plugs of the audio cords are colored: White plugs and jacks are for left audio signals, and red ones for right audio signals.

To remove the speaker grille, inserting your fingers at the top of the speaker grille, pull towards you. Then pull the bottom towards you.

To attach the speaker grille, put the projections of the speaker grille into the holes of the speaker.

For UX-P5

To audio output

To audio input

	OUT
AUX R	L
	IN

Audio equipment

By using audio cords (not supplied), connect:

•Between the audio input jacks on the other equipment and AUX OUT jacks: For recording on the other equipment.

•Between the audio output jacks on the other equipment and AUX IN jacks: For playing the other equipment.

For UX-P3

AUX

RL

To audio output

Audio equipment

For playing the other equipment through this unit,

connect between the audio output jacks on the other equipment and AUX jacks by using audio cords (not supplied).

– 8 –

Image 13

Contents UX-P5 UX-P3 For UX-P5 Page UX-P5/UX-P3 Class Laser Product Introduction PrecautionsAbout This Manual Contents Front Panel Location of the Buttons and ControlsFront Panel Become familiar with the buttons and controls on your unitSee pages in the parentheses for details Display Window UX-P3 Remote Control CD 3/8button 10, 14 Getting Started Supplied Accessories Connecting AntennasTurn the AM loop antenna until you have the best reception Connecting SpeakersRelease the finger from the clamp AM antennaBy using audio cords not supplied, connect Connecting Other EquipmentTo connect audio equipment For playing the other equipment through this unitYou can record CD sound onto the connected digital equipment Adjusting the Voltage SelectorCommon Operations Turning On the Power Setting the ClockSelecting the Sources and Starting Play Setting the AM Tuner Interval Spacing Adjusting the VolumeOn the unit only Selecting the Sound Modes Reinforcing the Bass SoundBass PRO until AHB 1 or AHB 2 appears To select the sound modes, pressPresetting Stations Tuning in a StationTuning in a Preset Station Listening to FM and AM BroadcastsPlaying Back CDs CD/CD-R/CD-RW Press CD 0 on the remote controlPlaying Back the Entire CD Normal Play Basic CD OperationsProgramming the Playing Order of the Tracks Program Play On the remote control only Load a CDPress Prog program Repeat to program other tracks youProhibiting Disc Ejection Tray Lock Playing at Random Random PlayRepeating Tracks Repeat Play Playing Back Tapes To play both sides Reverse ModePlaying Back a Tape Close the cassette holder gentlyRecording on a Tape RecordingCheck the recording direction for the tape Press RECCD Direct Recording One Track Recording To record on both sides Reverse ModeRepeat steps 2 and 3 to record other tracks you want To stop CD Direct Recording, press 7. The tape stops afterUsing Daily Timer and Recording Timer Using the TimersOn the remote control only Press Sleep Using Sleep TimerHow Sleep Timer actually works Wait for about 5 seconds after specifying the time lengthCleaning the unit MaintenanceHandling discs Handling cassette tapesSymptom TroubleshootingSpecifications UX-P5