JVC UX-P400 manual Introduction, Precautions, How to Read This Manual

Page 6

English

Introduction

Precautions

Installation

•Install in a place which is level, dry and neither too hot nor too cold—between 5°C and 35°C.

•Install the System in a location with adequate ventilation to prevent internal heat buildup inside the System.

DO NOT install the System in a location near heat sources, or in a place subject to direct sunlight, excessive dust or vibration.

•Leave sufficient distance between the System and the TV.

•Keep the speakers away from the TV to avoid interference with TV.

Power sources

•When unplugging the System from the wall outlet, always pull on the plug, not the AC power cord.

DO NOT handle the AC power cord with wet hands.

Moisture condensation

Moisture may condense on the lenses inside the System in the following cases:

•After starting to heat the room

•In a damp room

•If the System is brought directly from a cold to a warm

place

Should this occur, the System may malfunction. In this case, leave the System turned on for a few hours until the moisture evaporates, unplug the AC power cord, then plug it in again.

Others

•Should any metallic object or liquid fall into the System, unplug the AC power cord and consult your dealer before operating any further.

DO NOT disassemble the System since there are no user serviceable parts inside.

•If you are not going to operate the System for an extended period of time, unplug the AC power cord from the wall outlet.

If anything goes wrong, unplug the AC power cord and consult your dealer.

How to Read This Manual

To make this manual as simple and easy-to-understand as possible, we have adapted the following methods:

•Button and control operations are explained as listed in the table below. In this manual, the operations using the remote control is mainly explained; however, you can use the buttons and controls on the main unit if they have the same (or similar) name and marks.

•Some related tips and notes are explained later in the sections “Learning More about This System” and “Troubleshooting,” but not in the same section explaining the operations. If you want to know more about the functions, or if you have a doubt about the functions, go to these sections and you will find the answers.

Indicates that you press the button briefly.

Indicates that you press the button briefly and repeatedly until an option you want is selected.

Indicates that you press one of the buttons.

2 sec.

Indicate that you press and hold the

button for specified seconds.

 

•The number inside the arrow indicates the period of press (in this example, 2 seconds).

•If no number is inside the arrow, press and hold until the entire procedure is complete or until you get a result you want.

Indicate that you turn the control toward the specified direction(s).

 

 

 

 

 

Indicates that this operation is only

 

 

Remote

 

 

 

 

possible using the remote control.

 

 

ONLY

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Indicates that this operation is only

 

 

 

 

 

 

 

Main Unit

 

possible using the buttons and controls on

 

 

ONLY

 

the main unit.

 

 

 

 

 

 

 

 

 

 

 

2

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Instructions Alimentação pode ser controlada à distância Precaución Important for Laser Products Contents Precautions How to Read This ManualIntroduction Prepare the Remote Control Getting StartedUnpack Hook Up For better FM/AM receptionBefore plugging in the System To assemble and connect the AM loop antenna To connect the speaker cordsBefore Operating the System Indications on the main displayGroup UP Group Down REV Mode FM Mode For private listeningTo select the band FM or AM Listening to the RadioTo set the AM tuner interval spacing only To tune in to a stationTo tune in to a preset station Playing Back a DiscTo insert a disc To locate a track directly and start play To select a trackTo locate a particular portion To insert a tapeTo adjust the tone Adjusting the VolumeAdjusting the Sound To emphasize rhythm feeling-RHYTHM AXAutomatically only Turning Off the PowerSleep Timer Changing the Display BrightnessBefore starting playback, activate Program Play Advanced Disc OperationsProgramming the Playing Order Select tracks you want for Program Play ExamplesTo exit from Program Play To check the programmed contentsTo modify the program To exit from Random PlayTo repeat a particular portion-A-B Repeat Recording on a Tape To change the Reverse mode if necessaryAdvanced Tape Operations Insert a recordable cassetteSynchronized Disc Recording To record only your favorite trackTo record the entire disc Timer Operations Select the playback source-TUNER, CD, or TapeSelect the volume level Select a preset station numberSet the hour then the minute for off-time How Daily Timer actually works How Recording Timer actually worksAdvanced Disc Operations see pages 14 to Daily Operations-Sound & Other AdjustmentsAdditional Information Advanced Tape Operations see pages 17 toTroubleshooting MaintenanceSpecifications Parts IndexMemo UX-P400 Micro Component System

UX-P400 specifications

The JVC UX-P400 is a compact yet robust audio system designed for music enthusiasts seeking high-quality sound in a space-saving format. This model showcases a blend of traditional hi-fi aesthetics with modern technological advancements, making it a worthy addition to any audio setup.

One of the standout features of the UX-P400 is its dual cassette deck, a hallmark of JVC’s commitment to versatile playback options. This allows users to enjoy their cassette collections while providing the ability to record from CD or radio, ensuring that both nostalgia and convenience are catered for. The cassette decks are designed for high-quality playback, minimizing distortion and enhancing the listening experience.

The UX-P400 is equipped with a CD player that supports various disc formats, including CD-R and CD-RW, providing flexibility for users who enjoy custom playlists. In addition to physical media, the system includes a built-in AM/FM tuner with an easy-to-read digital display and 30 preset stations, making it simple to access your favorite radio shows and music.

Sound quality is a primary focus of the UX-P400. The system boasts a powerful amplifier delivering impressive output, ensuring a clear and dynamic listening experience. JVC has incorporated their advanced audio technologies, such as Virtual Surround technology, which broadens the soundstage and immerses listeners in their favorite tracks, providing an encompassing audio experience.

The UX-P400 features a sleek and modern design, with a user-friendly interface that includes an intuitive remote control, allowing for convenient operation from a distance. Its compact size makes it ideal for small spaces, whether it be a cozy living room, bedroom, or office, while the elegant finish complements a range of interior styles.

Connectivity is also a highlight of the UX-P400, featuring auxiliary inputs for connecting external devices, such as smartphones or tablets. This versatility ensures that users can enjoy digital music libraries and streaming services alongside their traditional media.

In summary, the JVC UX-P400 is a well-rounded audio system that combines nostalgia with modern functionality. With its cassette decks, CD player, AM/FM tuner, and advanced audio technologies, it offers an exceptional listening experience for users of all ages, making it a perfect choice for anyone looking to enrich their audio journey.
Top Page Image Contents