JVC UX-P3 manual Using the Timers, Using Daily Timer and Recording Timer

Page 23

Using the Timers

Continued

 

English

There are three timers available — Daily Timer, Recording Timer, and Sleep Timer.

Before using the timers, you need to set the clock built in the unit (see page 9.) When you press TIMER on the unit for more than 3 seconds, the display alternates between “ADJUST” and “CLOCK” for about 5 seconds.

Using Daily Timer and Recording Timer

You can set the timer whether the unit is on or off.

2 Set the on-time you want the unit to turn on at.

1)Press ¢ or 4to set the hour, then press TIMER.

2)Press ¢ or 4to set the minute, then

press TIMER.

TIMER

 

The unit enters off-time setting mode.

[DAILY

]

When the on-time comes, the unit automatically turns on

(the indicator flashes just before the on-time, and continues flashing while the timer is operating.) Then, when the off-time comes, the unit automatically turns off (on standby).

The timer setting remains in memory until you change it.

• When the DAILY indicator is lit on the display, the timer

acts as the Daily Timer. Once the Daily Timer has been set,

3 Set the off-time you want the unit to turn off (on standby) at.

1) Press ¢ or 4to set the hour, then press

TIMER.

2) Press ¢ or 4to set the minute, then press TIMER.

The unit enters source selecting mode.

TIMER

it will be activated at the same time everyday until the timer

is turned off.

• When the REC indicator is lit on the display, the timer acts

as the Recording Timer. After the Recording Timer has

been performed, the details of the setting remain stored but

the timer is turned off.

Before you start...

When using “ TUNER” as the source to play, make sure to select the desired station before turning off the power.

•There is a time limit in doing the following steps. If the setting is canceled before you finish, start from step 1 again.

On the unit ONLY:

1

Press and hold TIMER for more

TIMER

 

than 3 seconds.

The timer ( ) indicator lights up, and the timer mode indicator (DAILY or REC) and the current on-time flash on the display.

The unit enters on-time setting mode.

[DAILY]

4 Press ¢or 4to select

 

 

 

 

 

 

 

 

the timer mode (Daily Timer

 

 

 

 

 

 

 

 

or Recording Timer) and the

 

 

source to play, then press TIMER.

 

 

• Each time you press ¢ or 4, the timer

TIMER

 

 

mode and the source change as follows:

 

 

DAILY TUNER REC TUNER

DAILY TAPE DAILY CD

DAILY TUNER: tunes into the last station you were listening to. (Daily Timer)

REC TUNER: records the last station you were listening to. (Recording Timer)

•Put a recordable cassette into the deck.

DAILY CD: plays a CD. (Daily Timer)

DAILY TAPE: plays a tape. (Daily Timer)

•Make sure that the tape direction is correct.

5 Press ¢or 4to set the volume level.

• You can select the volume level

(“VOLUME 0” to “VOLUME40” and “VOLUME –”).

If you select “VOLUME –,” the volume is set to the last level when the unit has been turned off.

To turn off the volume while the Recording Timer (REC TUNER) is working, set the volume level

“VOLUME 0.”

– 18 –

Page 22 Page 24
Image 23
Page 22 Page 24
Contents Micro Component System Page Page UX-P3 Class Laser Product About This Manual PrecautionsIntroduction Contents Become familiar with the buttons and controls on your unit Location of the Buttons and ControlsFront Panel See pages in the parentheses for details Display WindowFront Panel Remote Control Remote ControlGetting Started Supplied Accessories Connecting AntennasAM antenna Connecting SpeakersTurn the AM loop antenna until you have the best reception Release the finger from the clampYou can connect both of the analog and digital equipment Connecting Other EquipmentBy using audio cords not supplied, connect To connect audio equipmentCommon Operations Turning On the PowerSetting the Clock Setting the AM Tuner Interval SpacingTo select the sound modes, press Adjusting the VolumeSelecting the Sound Modes To select the external equipment as the sourceListening to FM and AM Broadcasts Tuning in a StationPresetting Stations Tuning in a Preset StationBasic CD Operations Press CD 0 on the remote controlPlaying Back CDs CD/CD-R/CD-RW Playing Back the Entire CD Normal PlayRepeat to program other tracks you On the remote control only Load a CDProgramming the Playing Order of the Tracks Program Play Press Prog programRepeating Tracks Repeat Play Playing at Random Random PlayProhibiting Disc Ejection Tray Lock Close the cassette holder gently To play both sides Reverse ModePlaying Back Tapes Playing Back a TapePress REC RecordingRecording on a Tape Check the recording direction for the tapeTo stop CD Direct Recording, press 7. The tape stops after CD Direct Recording One Track RecordingRepeat steps 2 and 3 to record other tracks you want Using Daily Timer and Recording Timer Using the TimersWait for about 5 seconds after specifying the time length Using Sleep TimerOn the remote control only Press Sleep How Sleep Timer actually worksHandling cassette tapes MaintenanceCleaning the unit Handling discsSymptom TroubleshootingSpecifications EN, CH 0401MWMMDWJEM

UX-P3 specifications

The JVC UX-P3 is a compact yet powerful micro audio system that combines modern technology with a sleek design, catering to music enthusiasts who desire quality sound without sacrificing space. This model stands out with its array of features and functionalities, making it a great addition to any home or office setting.

One of the main highlights of the JVC UX-P3 is its ability to deliver high-fidelity audio performance. Equipped with a robust amplifier, this system produces clear, detailed sound across a variety of genres. The system supports various audio formats, including CD, FM/AM radio, and USB playback, providing versatile options for music enjoyment. The built-in CD player is compatible with CD-R/RW discs, allowing users to listen to their favorite compilations without any hassle.

The UX-P3 integrates Bluetooth technology, permitting wireless streaming of music from smartphones, tablets, and other Bluetooth-enabled devices. This feature adds convenience, allowing users to enjoy their favorite playlists and tracks without the need for cords and cables. The Bluetooth range is also commendable, enabling seamless connections from a distance.

Another notable characteristic of the JVC UX-P3 is its sleek design. The compact form factor fits comfortably on shelves, desks, or any limited space, making it an ideal choice for smaller rooms. The system features an intuitive interface, complete with a clear display and easy-to-use controls, which enhance user experience.

In addition, the UX-P3 offers a range of preset equalizer settings, enabling users to tailor sound profiles to their liking. Whether one prefers enhanced bass for electronic music or clearer vocals for spoken word, the equalizer presets help achieve that desired audio balance.

Furthermore, the system's headphone jack allows for personal listening, providing an option for late-night music sessions without disturbing others. The inclusion of a digital clock with a sleep timer also adds functionality to the system, ensuring users can enjoy their music while maintaining control over their listening routines.

The combination of these features establishes the JVC UX-P3 as a well-rounded audio system that satisfies the demands of modern music listeners. Whether it's for casual listening, creating a lively atmosphere for gatherings, or simply enjoying a quiet moment with a favorite album, the UX-P3 promises a fulfilling audio experience. Its technology, design, and versatility solidify its position in the market as an exceptional choice for compact audio solutions.
Top Page Image Contents