Assembly
Tools Required:
You will need two adjustable wrenches and a rubber hammer for assembly.
NOTE: Hand tighten bolts and locknuts until machine is fully assembled.
STEP 1
Connect Main Frame (2) to Front Base (4)
by securing with M10 x 90 Bolt (17), two Washers (19), and Lock Nut (20).
20 | 19 |
|
|
|
|
| |
| 19 | 2 |
|
4 |
|
|
|
| 17 | 20 |
|
|
| 19 | |
|
|
| |
|
|
| 19 |
|
|
| 15 |
STEP 2
Slide Upright Frame (1) into Main Frame (2). | 2 | |
Make sure the adjustment holes in the Upright | ||
Frame are facing the Main Frame Assembly (2). | 1 | |
Slide Bolt M10X80 (15) into Upright Frame (1) | ||
| ||
and secure with two Washers (19) and Lock Nut (20). |
|
4