Part Identification Chart

Refer to the drawings below to identify small parts used in assembly. The number in parentheses by each draw-
ing is the key number of the part, from the PART LIST on page 10 of this manual.	Note: Some small parts may
have been pre-attached. If a part is not in the parts bag, check to see if it has been pre-attached.

M6 x 16mm Screw (18)

M6 Washer (26)

M10 Washer (22)

M10 Nylon Locknut (23)

M10 x 63mm Button Head Bolt (21)

M6 x 68mm Screw (27)

M10 x 75mm Button Head Bolt (19)

M12 x 87mm Button Head Bolt (17)

M12 Nylon Lockut (24)

M10 x 115mm Carriage Bolt (20)