Using the Interactive Stand

	IR Pod
Speaker	Speaker
CD Player
CD Buttons	Ionizer Button
	Ionizer

HOW TO USE THE IONIZER

The CleanAireTM ionizer helps minimize airborne contaminants using oppositely charged steel plates that silently clean and circulate air without fans.

To turn on the ionizer, press the Ionizer button. To turn off the ionizer, press the Ionizer button again. Note: If the interactive stand is operating from the power sup- ply, the ionizer will run until it is turned off. If the inter- active stand is operating from batteries, the ionizer will run for two hours and then automatically turn off. To conserve the batteries, turn off the ionizer by pressing the Ionizer button.

HOW TO USE NORDICTRACK WIRELESS WORKOUT CD PROGRAMS

The interactive stand uses line-of-sight infrared tech- nology to control your exercise equipment. To ensure a strong signal, make sure the receiver on your exer- cise equipment (see assembly step 4 or 5) is facing directly toward the IR pod on the interactive stand (see the drawing above). If your exercise equipment does not respond to signals from the interactive stand, see INTERACTIVE STAND TROUBLESHOOTING on page 8.

When you use a NordicTrack Wireless Workout CD program, a certified personal trainer will guide you through your workout as the program controls your exercise equipment. Note: To purchase additional

NordicTrack Wireless Workout CDs, call toll-free 1-800-735-0768.

Follow the steps below to use a NordicTrack Wireless Workout CD program.

See the console operation instructions in the

1 user’s manual for your exercise equipment and select the iFIT.com mode.

Insert a NordicTrack Wireless Workout CD into

2 the CD player.

To open the CD player, lift the lid of the CD player in the indicated location. Carefully insert a CD into the CD player and close the lid.