NordicTrack 30510.2 user manual Assembly

ASSEMBLY

Assembly requires two persons. Place all parts of the elliptical exerciser in a cleared area and remove the
packing materials. Do not dispose of the packing materials until assembly is completed. In addition to the
included allen wrenches, assembly requires a phillips screwdriver			, an adjustable
wrench	, and a rubber mallet	.

As you assemble the elliptical exerciser, use the drawings below to identify small parts. The number in parentheses below each drawing is the key number of the part, from the PART LIST on page 25. The second number is the quantity needed for assembly. Note: Some small parts may have been pre-assembled. If a part is not in the parts bag, check to see if it has been pre-assembled.

Star Washer	M8 Split	Wave Washer	M8 Washer
(112)–8	Washer (90)–3	(111)–2	(88)–6

M8 Jamnut	M10 Nylon
(79)–5	Locknut (81)–2

M4 x 14mm	M4 x 16mm			M4 x 32mm	M4 x 45mm
	Round Head			Round Head
Screw (104)–8	Screw (101)–8		Screw (105)–6		Screw (108)–2
Hub Screw (87)–8		M8 x 23mm Shoulder		M8 x 23mm Button	M8 x 43mm Button
		Screw (115)–4		Screw (84)–4	Bolt (78)–4
	M8 x 69mm Button			M10 x 80mm Carriage
	Bolt (80)–1				Bolt (82)–2

M10 x 127mm Button Screw (83)–2

5