ParaBody 829 manual 8 X

STEP 1: Insert four COVER END CAPS (37) into the ends of REAR BASE LEG (12) and FRONT BASE SUPPORT (1). See FIGURE 1.

STEP 2: Slide two 1-1/4 x 5” GRIPS (36) over tubes on REAR BASE LEG (12). See FIGURE 1.

STEP 3: Securely assemble REAR BASE LEG (12) to LEG FRAME (11) using two 3/8 X 3” BOLTS (20), four 3/8” FLAT WASHERS (24), and two 3/8” NYLOCK NUTS (25). See FIGURE 2.

STEP 4: Securely assemble FRONT BASE SUP- PORT (1) to LEG FRAME (11) using two 3/8 X 3” BOLTS (20), four 3/8” FLAT WASHERS (24), and two 3/8” NYLOCK NUTS (25). See FIGURE 3.

STEP 5: Slide two 1-1/4 X 5" GRIPS (36) over

RIGHT LEG EXT HANDLE (9) & LEFT LEG EXT HANDLE (10). See FIGURE 4.

	36
37	12
1
37
FIGURE 1
12
11
	25
	24

	24
FIGURE 2	20 3/8 X 3”
		11
1
		25
		24
FIGURE 3 3/8 X 3”		24
		20
	9 & 10
36

FIGURE 4

6