ParaBody 822 manual Step

	3
	6
	13
FIGURE 4	7

STEP 4:

•Slide the four ROLLER PADS (7) onto the MAIN PAD SUPPORT (3) using two 3/4 X 16” TUBES (6), and four STARLOCK COLLARS (13) as shown in FIGURE 4.

15

3

1

FIGURE 5

STEP 5:

•Pull back the SPRING PIN and CAREFULLY slide the MAIN PAD SUPPORT (3) over the FRONT BASE SUPPORT (1) as shown in FIGURE 5.

•Insert one 1-3/4” SQ. END CAP (15) into the end of the FRONT BASE SUPPORT (1) as shown in FIGURE 5.

6