Parts List

KEY	PART #	DESCRIPTION	QTY
1	6416002	LEG HOLD DOWN FRAME	1
2	6125101	ROLLER PAD SHAFT	2
3	6194601	ROLLER PAD	4

KEY	PART #	DESCRIPTION	QTY
4	3105401	STARLOCK COLLAR	4
5	6236701	1-3/4 IN. SQ. END CAP	2

U-PIN

PIN STOP	UPRIGHT TUBE,
	BENCH FRAME

FIGURE 1

STEP 1:

*Insert two CAP END (5) into both ends of the LEG HOLD DOWN (1) as shown in figure 1.

*Assemble four ROLLER PAD (3) to the LEG HOLD DOWN (1) as shown, using two ROLLER PAD SHAFTS (2).

*Using rubber mallet or hammer gently tap the four STARLOCK COLLAR (4) to the ends of each ROLLER PAD SHAFT (2)

*To perform DECLINES or AB CRUNCHES, insert the LEG HOLD DOWN ASSEMBLY into the UPRIGHT TUBE of the BENCH FRAME as shown in FIGURE 1, and tighten in place using the THUMBSCREW. To adjust the SEAT PAD for the DECLINE position, pull out on the U-PIN. Rotate the U-PIN back pass the FIRST PIN STOP. Release the U-PIN, and allow it to rest up against the SECOND PIN STOP.