ParaBody 777101 manual Tighten

			14
				36
				TIGHTEN!
3/8 X 3-3/4”	57		15	18
		2	63
FIGURE 5

STEP 5:

•Swing the GUIDE RODS (18) into the guide rod bushings in each of the RIGHT and LEFT UPRIGHT PLATES (14 & 15) as shown in FIGURE 5.

•LOOSELY assemble the RIGHT and LEFT UPRIGHT PLATES (14 & 15) to the UPRIGHT (2) using three 3/8 X 3-3/4” BOLTS (57) and three 3/8” LOCK NUTS (63). See FIGURE 5.

•Slide the SHAFT COLLARS (36) to the top of the GUIDE RODS (18) and tighten set screws as shown in FIGURE 5.

FIGURE 6
4
25
	5
	63
	1
	64
3/8 X 3-3/4”	57

STEP 6:

•LOOSELY assemble the RIGHT and LEFT ARM SUPPORTS (4 & 5) to the BASE (1) using four 3/8 X 3-3/4” BOLTS (56), four 3/8” FLAT WASHERS (64), and four 3/8” LOCK NUTS (63). See FIGURE 6.

•Apply WEIGHT STACK LABELS (25) to the WEIGHT PLATES (21) as shown in FIGURE 6.

9