ParaBody 805106 manual Step

1/2 X3"

I !

FIGURE3

STEP 3:

3/8

¯Snap two 3 X 2" GUIDEINSERTS(15) into the ends ofthe WOLFFSLEEVE(7) =~s-shown in HGURE

¯In~er~ 3/8" SPRINGPIN ASSEMBLY(11) into the spring pin barrel on WOLFFSLEEVE(7) and tighten securely. See FIGURE3.

¯Slide one 4" VINYLCAP(17) over the U-PIN(16) as shown in FIGURE

¯Slide U-PIN (16) through the bushing on WOLFFSLI~.Wv-E(7) and attach with PAL-NUT

¯Slide the WOLFFSLEEVE(7) over the BENCHFRAME(3).

¯Securely assemble the BENCHFRAME(3) to the REARLEG(1) & the SWIVELPLATE(2) using two

3" BOLTS(21), two 1/2" FLATWAS~(24), and two 1/2" NYLOCKNUTS(26) as shown in FIGURE

¯Securely assemble the 2 SQ.X18" TUBE(8) to the BENCHFRAME(3)using two 3/8 X3" BOLTS(19), 3/8" FLATWASI-~I~S(23), and two 3/8" NYLOCKNUTS(25). See FIGURE3.

0 I	! I 1 I [ ! ! !	3 [	I	I	I	!	I	!	I
I	!	!	I	!	!
		4