Step | ParaBody 893104 guide

STEP 2:

•Attach two NON-SKID STRIPS (24) to the FOOT PLATE (6) as shown in FIGURE 2.

FIGURE 2

	19
	5
	4
	44
	43
	1/2 X 4” 37
FIGURE 3	25
FIGURE 3	22
STEP 3:

•Insert four 2” SQ. END CAPS (22) & two 3 X 2” END CAPS (19) to the ends of the FRONT UPRIGHTS (5) as shown in FIGURE 3.

•Assemble two 13-1/2 X 1-5/8” RUBBER STRIPS (25) to the bottom of the FRONT UPRIGHTS (5) as shown in FIGURE 3.

•LOOSELY assemble the FRONT UPRIGHTS (5) to the UPRIGHT SUPPORT(4) using four 1/2 X 4” BOLTS (37), four 1/2” WASHERS (43), and four 1/2” LOCKNUTS (44) as shown in FIGURE 3.

	1/2		1/2		1/2		1/2		1/2			1/2
0		1		2		3		4		5		6